RemoteJoy Lite 6.20 TN Fix2. Video Out on your PC via USB

Share

*Updated 19th Jan 2010, I have uploaded the drivers and GUI also. Tested working on my Go 6.20 HEN *

Takka has released fix2 for RemoteJoy Lite HEN. This update adds up to 1920 x 1080 resolution support, of course at that res it will be quite pixelated. If your new to remotejoy, its a plug-in that lets you display your PSP screen on your . Its a video out to your via . (We use it to record our PSP videos here) Thanks to Takka its also working on 6.20 TN HEN.

Installation:

  • ms0: / seplugins / RemoteJoyLite.prx 1  (for PSP-2000/PSP3000′s)
  • EF0: / seplugins / RemoteJoyLite.prx 1 – (PSP Go)
  • Disconnect your PSP from your PC and press SELECT and then Restart VSH
  • Owners of Windows Vista and Seven will need to restart their PC and at the boot screen press F8 to select disable driver signing
  • Connect your PSP to your PC (do not select USB Connection)
  • You will be prompted automatically to install the PSP Type B driver
  • Select the appropriate drivers for your operating system drivers from the drivers folder in the archive:
  • Usb_driver for 32 Bit
  • Usb_driver_x64 for 64bit systems
  • After installation run the file in the folder and RemoteJoyLite_fix2.exe GUI

Source: Takka’s Blog

Download: RemoteJoy Lite 6.20 TN (Updated 19 Jan 2010)
(RemoteJoy Lite 6.20 TN (Updated 19 Jan 2010) - 911.4 KiB - 48,340 Hits)


Similar Posts:

  • None Found

Gamer Headlines
  • ArcSys

    I’m not getting the prompt to install PSP Type B driver.

    In the steps it says “You will be prompted automatically to install the PSP Type B driver”, it’s not coming up when I connect my PSP go to my PC. I did all the other steps correctly but it’s still not giving me the prompt.

    • rico

      open all the text documents included in the seplugins folder and add “1″ at the end of the phrase
      eg.} ms0:/seplugins/RemoteJoyLite.prx 1

      press select and restart VSH. then install the drivers.

      • stan

        i tried this too but it does not prompt me, help!!!

  • david

    will disable driver signing do anything to the computer later on……………will i have to press f8 once more on restart to re-enable driver signing….and what will happen if i enable back driver signing after it has worked….???

    • Twist

      no you don’t, next time you restart your computer, it goes back to normal

      • david

        thnxx

  • david

    which is the boot screen……………where they say welcome or where the 4 coloured beams appear ??? please help

  • ichimitch

    some people should think about things a bit before posting time wasting idiotic questions…

  • http://pspslimhacks zane

    it keeps telling me cygusbo.dll is missing ?? what must i do

    • http://GAWW4G.PL waefsrgawsf

      trzeba lisubo zmienic na cygusbo ty w googlach wg to sprawdzales?

  • Newbie the Dumbass

    I have a question… does it works for psp 3004 6.20 permanent patch???

  • Newbie the Dumbass

    ignore my comment….. im playing little big planet!!!!

  • Newbie the Dumbass

    now im watching Rio!!!

  • asaka551

    it is work on pro b5?

  • Awsers

    This is for 6.20 TN Permanent will work Nofity If you get errors

  • Mr. S

    Are there any exact details missing? I did the: open all the text documents included in the seplugins folder and add “1″ at the end of the phrase
    eg.} ms0:/seplugins/RemoteJoyLite.prx 1

    press select and restart VSH. then install the drivers.

    But I got no option to switch on seplugins in the PSP with R + Select pressing down while switching on the PSP. Making me unable to install the drivers. Is it the computer that prompts you to install drivers automatically? I also did restart the VSH by resetting it.

  • Julius

    when i tried to launch the GUI it gives me this error: “This application has failed to start because cygusb0.dll was not found. reinstalling the application may fix this problem” please assist. or if you could suggest a difrent plugin that act like this. thank you

    i have 6.20 PRO-B8

  • PSP30006.60PRO-B9

    I have a PSP 3000, and its system software is 6.60 PRO-B9 when i launch the hack psp firmware 660 PRO-B.
    So basically, my psp doesnt have a permanent hack. I always launch the hack for it to become CFW.

    My question is, is this compatible with my PSP? since i’ve tried and my psp dies every time i run remotejoy.
    Wonder if I’m doing something noob… thx in adv

  • sally

    Where on the instructions on the video output? My screen gets pixels at different areas.

  • Shadow_ball

    does this work for psp 1000?

    • http://www.facebook.com/Squall.Leonclaw Squall Leonclaw

      unfortunately, i only have psp1001 and trying to find correct PSP sys transfer address. Should work with psp1000 if you’ve got the proper transfer address.

  • Mudman

    does this work for 6.20 Pro B-10?Please answer

  • http://www.facebook.com/profile.php?id=100002027460839 Oscar Jacob Cadena Jr.

    yes it works for 6.20

  • http://www.facebook.com/profile.php?id=100001584354497 Isaac Sharrow

    when run i get “The program can’t start because cygusb0.dll is missing from your computer. Try reinstalling the program to fix this problem” any ideas?

  • KreyinColour

    It did not prompt me to install the PSP Type B driver. How to do I connect my psp to PC without using the usb connection?

    • waveblade

       go to device manager and install the driver on ya own if ya wana know how il write a step by step guide for ya if i get ya reply im generaly not good at replying things so might be good to email me lol

      • Yrralvillegas

        i also got the problem i dont know how to connect my psp on my pc without using the usb connection

  • waveblade

     does this work for psp 1000 and if i tried doing it on a psp 1000 would it bring up the cygusb0.dll error because i have and it has brung up that error.

    • Johny Goo

      That error isn’t specific to 1000′s. Go to http://www.findthatdll.com/sea

      and download the dll. Then put in the GUI folder and it should work.

  • Krayziepoints

    Working on PSP3003 – 6.20PRO-B10 (fix1)

    • dash

      but it’s not for me

  • dragon_5556

    i got 2 Trojans and 1 back door .exe file, don’t recommend downloading

    • Qwer

      loser!!

    • dragon_555 is a cocksucker

      Don’t lie, faggot.

  • http://www.facebook.com/Squall.Leonclaw Squall Leonclaw

    working on my PSP1001

    • Hotmauil

      rubbish lol 

  • Rm8970

    Can someone please help? When i run the .exe file i get 
    “The program can’t start because cygusb0.dll is missing from your computer. Try reinstalling the program to fix this problem”

  • ROM

    When i am installing driver it says something that includes error 52,how?

  • MotherFuckerul

    Should I directly install on my psp or I can download on pc and put it in psp?

  • Somebody

    “EF0: / seplugins / RemoteJoyLite.prx 1 – (PSP Go)” I have PSP Go, so I know this is the applicable first step, but what does it mean? Also, “Disconnect your PSP from your PC and press SELECT and then Restart VSH”. I pressed select and nothing happened. 

  • PopTarTs

    Im having a problem with the settings in remotejoy. I cannot see most of the words in the settings, for example under the Joy tab i cannot see the words on the buttons. also while i was installing i didint see the file RemoteJoyLite_fix2.exe . I am using Windows XP with a PSP-1001 on 6.60 PRO B9

  • dash

    it is telling me that cygusb0.dll was not found