PSP Hack: Font Mod for 6.20 OFW via PSP Filer and HBL

Thursday, June 10th, 2010

Thanks to MaX SLayeR A new fresh hack is out for the PSP Go or any OFW 6.20 PSP, via PSP Filer 4.4 and with the help of the Half Byte Loader (HBL) we’re now able to access flash1 and hack the font’s of our beloved PSP Go’s with 6.20 OFW.

Before we go any further with this, we just need to point out that touching your PSP’s NAND flash is risky business. It could in fact leave you with a plastic brick for a PSP. You’ll been warned ok, if you want to take this risk. Read on….

The steps involved are not as hard as they it look, but I’ll try and be as clear as possible:

Download a copy of HBL rev .85 and the Papaton 2 demo thats needed to run the save game exploit/HBL.

Download the Font Mod Hack + PSP Filer + Xvi32 Hex editor pack. (Below)

Start up the HBL, load PSP Filer 4.4 and then once loaded go into hacker mode (R + Left)

Move to flash1 by pressing start

Copy the registry folder over to the memory stick pr mass memory

Open the system.dreg file in the included hex editor XVI32 or use your own hex editor

Change flash0:/font to now read “ms0:/fontmod” If you have a PSP Go change it too “ef0:/fontmod”. Save it.

Move the files from the registry folder over a new folder with the files from fixupreg3 in it and then run the .exe

Move the new registry files back on the memory stick / mass memory

Now move the fontmod folder in the root of the memory stick / mass memory

Run HBL again, then load PSP Filer once again entering hacker mode.

Now in PSP Filer copy the registry files from the memory stick to flash1:/registry/ (overwrite them)

Your done, exit PSP Filer and your new font should show up.

Source: PlaystationLandia (Italian)

(Patapon 2 Demo (USA) - 99.2 MiB - 103,971 Hits)

Download: HBL Rev 109 Stable For Patapon 2 Exploit and up to OFW 6.20

(HBL Rev 109 Stable For Patapon 2 Exploit and up to OFW 6.20 - 556.7 KiB - 24,860 Hits)

Download: Font Mod Hack + PSP Filer + Xvi32 Hex editor pack.

(Font Mod Hack + PSP Filer + Xvi32 Hex editor pack. - 3.5 MiB - 5,146 Hits)

Similar Posts:

None Found

Tags: Half Byte Loader, HBL, PSP Filer, PSP Firmware 6.20

Posted in PSP Exploits

cHuCky

wooooooooooooooooow
Go-Hack

THis Seems like risky buisnees. HELP ME TOM CRUISE
ledbetterp3

should i update from 3.50 chickhen?? its not workin anyway and i dont feel like fixing…

microberry1

NO! Permanent cfw is WAAAAAY better than this (at the moment), but what you can do is use mhuspeed and use 5.03 gen-c (google them).

btw, fixing chickhen/mhuspeed takes about as much effort as doing all of this.

Rhythmic Essence

Is it still impossible to install CFW with the Half Byte Loader? If they can access the flash…

xxxshaqxxx

ye it would be a big help if they could get CFW working from pspfiler

Tyler

Looks like this new discovery might set things in motion. Cant wait!

kira.30

and what does this actually do ??
xxxshaqxxx

nice.. i got mine working
http://myspace.com/tylersmyspaceplace Tye

This is definitely a step in the right direction! Editing in the actual firmware is bad ass. I can feel the CFW on my pspGO already…
Fasih

just made this accnt to only make a post here
WOW, this is definitely a big step, if they are accessing flash, then it cant be long till we get iso’s running
love u devs :p

wdfowty

You have to remember that this is still a userland exploit. ISO and CSO needs a kernel-level exploit to run. correct me if i’m wrong.

RockerZ6613

OFW 6.20 exploit has now kernel access flash1, now devs will take advantage of this kernel and even install temporary CFW modules to flash1. Everyone is now Insured of a CFW for the Go and psp 3000 (5.XX to 6.XX).
Lets just hope its coming soon.
izkyle33

i cant get mine to work it says memory full or somthing like that
i have a psp 3000 with 5.55 OFW
microberry1

Just out of interest (don’t need this, I have a psp 1000 5.50gend-2), but could you brick the psp if you remove the memstick and turn on the psp?

Fasih

yeah u can thts why am not even gonna try it… just happy for this leap tht the developers made.
not wrth risking a brick just fr a font change :p

psp100

what so are you saying that if u download flash it etc and u turn off ur psps with the flash still active and remove the memorystick and turn on ur psps it will get brick?

magorem

I have done that a million times, and nothing happened….. Its all in flash 0

kewalshah27

WILL THIS WORK ON PSP 3000 5.50 VERSION….PLZ TELL ME………..
hacktester

)Look guys,its not like this.I will explain a litle bit for you:
So the PSP has flash0 and flash1.In flash0 is the firmware and in flash1 are the settings.I think it’s pretty obvious that this writed in flash1,not in flash0,so….A CFW coming from HBL its just a nice dream.HBL could use only a litle part of flash0,but its not enough to lead to a CFW.No CFW=>no ISO.About what RockerZ6613 said,belive him,because he is right.No one know WHAT the exploit is,but we do know that coyotebean(the guy who discovered this) has the kernel keys,which requires a kernel exploit.This could lead to a HEN.

Fasih

and hen does lead to loading ISOs good enuff for me.

izkyle33

can somone post a video on how to do this and how they was able to copy the registry folder
izkyle33

nymaNVM i got t to work but it always shows the BSOD
izkyle33

yeah I got it to work!!!
hacktester

If cotoybean is not against piracy,maybe we could load ISO with a HEN,but team GEN or M33 must let him use their code for loading ISO,in case that he is not able to do that.I’m waiting for some updates from him;I’m not sure how good is he at hacking…The ideea is that if he will not be able to code an ISO loader,eveything depends on the team GEN or M33.

cboushell

I hate to say it but he doesn’t need to get permission from anyone if he knows what he is doing. They(Team GEN) may get upset with him but he is free to do what ever he wants. It would be nice if they gave their blessing and helped out as much as possible but if they don’t f.uck’em. I would hope that they would want to see the PSP scene advance and give their blessing.

Fasih

Quoting from some other site…
“a 6.20 kernel mode exploit has been confirmed — more on that later!”
What does that mean? There’s something kernel and user mode… and i think kernel mode enables you to run iso’s right?
hacktester

Yeah,but you cant play ISOs just with the exploit.Cotoybean will need to code something to get the ISO loading.It was the same with HBL;at first it was good at nothing,but then wololo and m0skit0 started to code and now HBL can use homebrews and even a font-mod.Even if he finded an exploit,you will need to wait a pretty long time to play ISOs with it;There were MONTHS of working on HBL until they get an emulator to load.So dont expect to get a HEN in about two months or something like that…
Fasih

well… i dont care hw long it takes, as long as it’s moving in SOME direction atleast…
they dont owe anybody anything… so even gettin an iso loader in a year will still be good enuff.
atleast now there’s something to look forward to
izkyle33

is coyotebean coding an eloader?
RockerZ6613

To all:
We psp owners have the Patapon2 user mode expoit that is still up to date but because we are able to run Psp filer we now have kernel access (kernel means access to the internal system of the psp) which is risky.
Even though it is just flash1 at the moment but still very impressive.
We can actually install anything on flash1 to patch the security check to play homebrew (like chickhen is to ram of the psp) so technically we can have some modules of cfw on flash1.

Devs can redirect the some modules to flash1 instead of relaunching the patapon2 expoit. ( we all know that flash1 is safe coz it is used for user settings and can be formatted by restoring default settings at system settings).

RockerZ6613

I forgot that there is actually 5 internal flash partitions:
Flash0: holds the firmware
Flash1:user settings
Flash2:some important keys or registries
Flash3:PS3 settings
Flash4:non formatted
Flash5:non formatted
hacktester

You are pretty right,but tehnically we have like 2/100 modules,so….I hope you understand what I mean:D

dominix98

I think it’s Master of Shadows work not him, he is a poser.. here’s the link http://www.playstationlandia.com/forum/viewtopic.php?f=91&t=31701
RockerZ6613

What this things are:
Hen => Hombrew Enabler => plays homebrew (has limited kernel access of the psp).

CFW =>Sony’s Official firmware with some few patches and addons(m33 modules) => plays anything (isos,homebrew,psx and etc and has Full kernel access of the psp).

Just Wait guys the scene is now back and running.

hacktester

I think there could be also ISOs on a HEN.Just because Davee didnt include a code for them in his HEN doesnt mean it is imposibile to get them…

RockerZ6613

@Hacktester this isn’t the 6.20 Kernel Exploit by Coyotebean.
This is mainly the Psp Filer gaining access to Flash1 while using the Patapon2 demo and HBL on the psp.

The exploit is still not released by Devs due to Sony Patching the exploit in the next update.

Davee didnt include the iso loader and did not make ChickHEN permanent even though he could have. He doesn’t want to endorse Piracy.But he did use some M33 modules and ask the permission of Dark_Alex to enhance ChickHEN in loading Homebrew.
It totally depends on how you to take advantage of the kernel Exploit and make the HEN temporary or permanent.

SullenSky

Great hack and tutorial, but I’m afraid I won’t use it – just love the default font way too much
RockerZ6613

I notice some people doesn’t know about things that are happening on the PSP Scene.
And Somehow talks out of topic like:
(ledbetterp3, microberry1)
but Hacktester is just overexcited about the new 6.20 kernel Exploit by Coyotebean.

Don’t worry guys the scene is starting to bounce back. Even though some say there won’t be any enabler for this exploit but what is the point of the exploit if we don’t use it true?
eternal noob

anyone bricked their shiney new psp yet with this? think i’ll take the warnings and leave it for the sake of a different font. great to see the 6.20 hacking scene coming on leaps and bounds though, well done guys
hacktester

Sorry for that,I just remembered the good times when I had 5.03 and HEN+5.03 MHU and I looooved it….I played PSP but especially PS1 games for hours,but I was so stupid to try to install 5.50 GEN-B.That allmost bricked my PSP 2000 with datacode 8c.In fact,it didnt really brick it,but I was not able to install CFW anymore.Now the very poor move was when i though that if I would update to 5.50 everything will be OK,but obviously I wasnt right.Now I read the readme for everything which have something to do with my PSP three times,and if it does not says anything about the model or the FW,I just dont use it.Sorry if I am boring,I just dont wanna let you think that I am a nerd without a life, desperate for ISOs…:D

magorem

No, you are not a nerd without or live, or something like that…., you are just an IDIOT, USE PANDORA BATTERY DUMBASS

hacktester

@magorem Use Google and your HEAD! I mentioned;Data Code 8c,not 8a,nor 8b.Its like a 3000,but it looks like a 2000.LOL,when do you think 5.00 M33 was released?Yesterday?! Why dont we try to hack a PSP Go using a Pandora Battery,isnt it a good ideea?

hacktester

However,on theese forums if there’s a topic about the 5.03 FW they talk about 6.20,and if there’s a topic for 6.20 they talk about 5.03,so its pointless to speak where you should when everyone is speaking where you shouldnt..
KloWn

How come every time something new is discovered people jump right to ” oh I can’t wait for the new CFW to be released” lol … All these exploits show is that there are holes in Sony’s firmware coding and nothing more So I say just sit back and enjoy the ride

KloWn

hacktester

Actually,you arent even a bit right:)What you said is available for crashes,not exploits.If what you said would be correct,there would be still no homebrew loader for 6.20 .Just let you know…

dominix98

dude, so you’re saying that cotoybean’s kernel keys have nothing to do with a HEN? sorry noob here.

Indian Sword

CONFIRMED: PSP 3000 with 6.20 OFW .. but I do not recommend to use it !!
Although the original font can be restored by restoring the default settings.. but it’s REALLY dangerous to do it !!
By the way, I will soon post a video about it..

iSWORD
psp3004

is this hack working on psp 3004 OFW 5.51 ?
Pingback: Anonymous
Nocs

m-am cam saturat sa astept k o sa apara cipatul pt 6.20 ((

hacktester

@Nocs, Fara suparare,da cred c-ai cazut in cap de dimineata:| Ai in fata ta cel mai popular mod de pe PSPSlim Hacks care ruleaza ditamai caru de aplicatii si tu vb despre chipuri…:))Lolololol….Macar ai observat ca exista un download link care te lasa sa downloadezi ultima reviziune si asta?(ultima reviziune este pe titlu cu..ultimate reviziune:)) )Tu poti astepta mult si bine un ,,cip” pt PSP….Pana apare inca o Baterie Pandora crek ne prinde Firmware-ul 8.70:))

Magical3

Is it possible to change settings in flash1, so that the psp doesn’t do a check making homebrew playable from the xmb, and not by launching the patapon 2 demo every time?

hacktester

Search on Google valentine-hbl.You should find the official development site.Make an account there and ask wololo or the others PSP devs by yourself.They are good boys,I mean they won’t eat you even if you would post a very stupid question(here is not the case,anyway..).Wololo is on holidays right now,but there’s a nice guy,ametric,which will answer to any question you got.

questionsgalore

ok im a noob to all of this stuff but, to run psp isos on a psp with the HBL exploit, couldnt they just build a psp emulator for the psp and run the iso files through that?

hacktester

They are working at this right now,but it could take even a year to release,because it is very very hard,so dont expect any soon release

RockerZ6613

@questionsgalore and hackstester
The answer is NO. because HBL only runs lowlevel homebrew.
The files needed to run ISOs and HIGH Homebrew are VSHCTRL.PRX, SATELITE.PRX, RECOVERY.PRX, MARCH33.PRX, POPCORN.PRX, SYSTEMCTRL.PRX.
Systemctrl.prx is the heart of every CFW installed on the PSP.
These modules are capable of running isos and high level homebrew.
So you cannot have an emulator that has a function of a full CFW.
But Someone from legend hackers manage to have an emulator for PS1s and made Dark_Alex realize that it is possible, and then started to code the 1.50 cfw as the proof of concept.
Please try to research on the new 6.20 kernel Exploit by Coyotebean to stop asking questions whether it is possible for the 3000 and the Go to get CFW running

hacktester

I just saw noob81 and m0skit0 on a forum of a project which will run ISO(maybe),and they belive in the guy who is making this.I woldnt belive in that too,but then I saw m0skit0 and noob81 on it,and if they say that is possible….It’s a hard work,so I wouldn’t be surprised if I would see how this project fail,but it is possible,that’s for sure!

RockerZ6613

@hacktester
Really man stop giving false info about hacking and the PSP scene.
We all know that Team Typhoon has the 6.10 kernel and CFW (6.10 typhoon ) showcased by NEON
and Now Coyotebean with 6.20 Go kernel keys and modules. Still not sure about the 3000 though but it is kernel so Internal access to the psp is possible. This Exploit as I said won’t be released until SONY stops with their Firmware update.
This 6.20 kernel could gain kernel access to the new PSP2.

hacktester

What is false,exactly? Most of the peoples here are just stupid or too lazy to type something on Google. If they were not how I say,they wouldnt be like ,,OMFG!!!HBL RUNS EMULATORS!!!??WHEN THE F*** THIS COME OUT?!”, I think you must be blind not to see this. Also,I just saw a lot of peoples asking about a compatibility list for HBL,even if there was allredy one on another page of comments(not here,in the HBL R85 article). If they are too lazy to look on some old comments,what about searching about 6.20 kernel keys? Also,I didn’t say anything about any release date of..anything.

hacktester

Also,looks like you are the one who gived false information about hacking You cant do anything for a HEN with flash1.Afaik,that would need the Kernel RAM to be patched(correct me if I’m wrong).You were kind of right,a CFW could involve patching the flash(afaik,not flash1),but that was patched in recent motherboards(it has been fixed with ta 88v3).

RockerZ6613

lol…hahaha
WRONG The TA-088v3 has the new Cpu that doesn’t support the custom IPL(Initial Program Loader) and has it’s own pre-ipl to double check the firmware on the memory stick if it is legit but still reads the pandora battery.Same with the TA-090v2 but this time the battery serial 0xFFFFFFF has been block by the new Cpu installed (this is why pandora battery does not work).
hahaha.
CFW totally uses the original firmware which is PATCHED to enabled Homebrew and with some new modules to support ISOs and other stuffs.
Didn’t you know that every opening (like the flash1) is an attack vector for us to install modules (but because we have to use the HBL it is useless(The HEN codes must to survive when the psp reboots like ChickHen by Davee.
HBL is useless if we have a kernel exploit.
We need to have the Full kernel access to install HEN which is all the flash partitions(flash0,flash1,flash2,flash3,flash4,flash5. and the ram),(flash4 and flash5 is not formatted leave it at that).

RockerZ6613

I think you don’t know what C and C++ or even lua scripting is? don’t you? well Sony’s psp firmware is a low level C programming. We hackers can hack anything but because we don’t have the information and the Keys we cannot modify shit.So that is why we rely on exploits especially with kernel rather than usermode.
Dark_Alex exploited the IPL and loaded his own code rather than Sony’s, this is how we can install CFW using the leaked service tool battery and using M33 modules instead of the just flashing the original firmwares.Team C+D were legend we try to keep the scene alive since DA is on a vacation or concentrating on his studies.He is a student by the way.
So how strong is your programming? if your a nerd or even a hacktester.
You still have lots of skill to develop but if you know all of these then you can improve your knowledge.
Well, sucks to be you my friend, accept the facts my boy.

hacktester

It’s obviously I heard of C++ and C,but I dont know how to use them.And I dont wanna learn them.And I alredy have a friend that could help me,but thanks anyway.I’m however not a nerd,but you could teach my ,,perfect” mate.She’s 100% a nerd and she isn’t good at all at Programming xD Really man,I didnt say that because I want to be your very best friend or something like that.If you wanna help me,it’s ok,but I did that just because I had to do it.

RockerZ6613

If you want to learn then go to this link:
http://www.google.com.au/url?sa=t&source=web&cd=1&ved=0CBQQFjAA&url=http%3A%2F%2Fps2dev.org%2Fpsp%2FProjects%2FPSPSDK&ei=tZwaTP2CJ9GTkAWQwfWbBg&usg=AFQjCNF8q7fvULublMyWUEc4PViveE3DJA

hacktester

Man,calm down a bit! I dont have any idea about how to code,so I could be wrong,but after I read what wololo said my thoughts were confirmed…This is what wololo said:
flash1 is not interesting for a HEN. For a HEN, what needs to be patched is the Kernel RAM.
a CFW on the other hand would involve patching the flash (not flash1, anyways), but CFWs cannot be coded for recent motherboards (the pre IPL hack has been fixed a while ago with ta 88v3).

I was actually talking about the IPL hack too,but whatever..Patched,blocked,isnt it the same thing? I never said it didnt read anymore the Pandora Baterry.I said that the hack was patched.As I said before,I know only basic things,I have no idea how to code so I may be wrong.I just learned from m0skit0 and the others from what they did said.And I was not talking about a permanent HEN,anyway…
hacktester

Y’know something?I really dont care if there will be an ISO loader or not.I dont care if there will be a CFW or HEN .ISOs can eat sh** and die,I have about 2 games which I would like to have,and I can buy them whenever I want from the shop.I would use only Remote Joy if I would have CFW,but it’s just a plugin,wtf?I’m really glad to see that there are still some people with some experience,not only ignorant noobs asking the same,and the same,and the same questions again.This discussion reached far enough to be closed;I really dont wanna argue with someone like you,because it’s rare to meet here someone which know at least whats flash0 and flash1.I really respect you for what do you know,and I hope we will meet again on another article.

RockerZ6613

Peace out bro!

ziggy262

there’s a 87v on wololo’s site it released 2 days ago June/16/10
RockerZ6613

@hacktester wait for my reply that is still awaiting moderation.
Please this is not an attack or criticism this is plainly an info.coz actually I have knowledge of programming.
hey stay in school:)

hacktester

Can I ask you something?I’ve been insulted by some f*g because I didnt know if popsloader is an emulator or not…So,is it or not?

RockerZ6613

Popsloader helps you load PSX titles (PS1 Games) on the PSP.
It is an emulator that makes use of the PSP hardware and certain modules which allows us to Play PSX.
So yeah it is widely known as an emulator to play PSX (PS1 games) on the PSP.
100% Sure
If you have any questions just post a comment.
hacktester

Hey Rocker,I have another question We all know that we could acces a litle part of flash0. Are we able to do something with that litle part?

triniwarrior

so what does this exactly do?
changes the font of the words thats all?
shivamthedarklord

plzzzzzzzzzzzzzzzzz any1 tell how to change # Copy the registry folder over to the memory stick pr mass memory
# Open the system.dreg file in the included hex editor XVI32 or use your own hex editor
# Change flash0:/font to now read “ms0:/fontmod” If you have a PSP Go change it too “ef0:/fontmod”. plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
randymysons

Hi, I’m new in this site. I hear that CFW 6.0 will be released but still its been months and still waiting for it to be released. I have PSP 3001 with a OFW 6.0, is there any body will help me how to downgrade my OFW 6.0 to OFW 5.03 so that it can be upgraded to 5.03 Gen CFW
randymysons

I hear that CFW 6.0 will be released but still its been months and still waiting for it to be released. I have PSP 3001 with a OFW 6.0, is there any body will help me how to downgrade my OFW 6.0 to OFW 5.03 so that it can be upgraded to 5.03 Gen CFW

RockerZ6613

Sorry mate you can’t downgrade psp 3000s and GOs
And there is no CFW 6.00 that is just a rumor coz 5.50s layout is just the same with 6.00s.

randymysons

so how can I make my PSP 3001 with 6.0 Official Firmware turns to Custom Firmware 5.3 Gen-C or D, Please help.
hacktester

You cant
randymysons

So it means that all PSP 3000 users with OFW 6.0 up are stucked and remain using UMD games and here in Philippines UMD’s are so expensive specially new game releases. Is there any chance with Team Gen or DAX?
randymysons

Is it possible to use Pandora Battery and Magic Stick to re-format/Re-Boot my PSP 3001 6.0 OFW and install OFW 5.0 and next step OFW 5.03 and use 5.3 Chickhen R2 to install 5.3 Gen-C
RockerZ6613

@randymysons
I’m Fil-Aussie, KUMUSTA!
The only way to hack it is by ordering a motherboard or an IC from hong kong that has 5.03 firmware, if you brick it that is. Hope warranty isn’t voided.
Just get a PSP Go.
Feels Premium
Pa-alam!
randymysons

Bummer! I’ll just sell my PSP3001 and buy a new one PSP2004 with CFW 5.0 or I’ll just wait for Team Gen for there CFW 6.0 Gen-A. Thank you very much friend.

shivamthedarklord

plzzzzzzzzzzzzzzzzz any1 tell how to change # Copy the registry folder over to the memory stick pr mass memory
# Open the system.dreg file in the included hex editor XVI32 or use your own hex editor
# Change flash0:/font to now read “ms0:/fontmod” If you have a PSP Go change it too “ef0:/fontmod”. plzzzzzz

Blade

i installed the fontmod on my psp 3000 fw 5.50, i also got birdman1fontpack v11 which also worked, but only when i changed the ltn0.pgf via my computer. i tried to change it using pspfiler by storing the fonts on ms0:/ and copying and overwriting ltn0.pgf in the fontmod folder, but i did that and tried to exit to XMB but it said system files corrupt (“BSOD”) every time i turned the psp on until i took my memory stick out and restarted it. the “BSOD” also apeared after i succesfuly installed fontmod, turned off my psp and restarted it without the memstick…. at first i thought i had a brick! LOL! XD

Blade

this is for shivamthedarklord………….. i have performed and proof read these exact steps and succeded. i am not responsible for anything that may happen to your device durring the process. READ ALL STEPS BEFORE PERFORMING THEM!….. Good Luck

1. load up Patapon hbl and run pspfiler
2. then go into hacker mode by pressing the R button while already holding the left button on the control pad
3. then You press the start button untill you see flash1 at the top of the screen
4. then move down to REGISTRY and press X
5. there will be options pertaining to each button, push O to copy or move the file
6. then another box will appear asking where you want to copy or move the folder
7. make sure “ms0 is highlighted and press Δ to copy (DONT “MOVE” THE FOLDER!)
8. then go back to XMB and connect to your computer
9. open the psp device on the computer and open the REGISTRY folder you previously copied
10. now also open the XVI32 hex editor
11. go to FILE in the XVI32 toolbar and click OPEN
12. select your psp device drive name
13. go into the REGISTRY folder and select “system.dreg” (NOT system.ireg!)
14. you will see hex numbers, but there are words on the right side, scroll down until you see “flash0:/font ”
15. click on the first letter of “flash0:/font” and type “ms0:/fontmod” or “ef0:/fontmod” for psp go. there should be no more of “flash0:/font”
16. save it to the same REGISTRY folder
17. now take both files (“system.dreg” and “system.ireg”) and put them in the same folder as the “fixupdreg3.exe” and “cygwin1.dll”
18. run the “fixupdreg.exe” (it will be quick, you might not even see it)
19. take the files in that folder and replace the files in the REGISTRY folder of your psp memory stick
20. also, put the fontmod folder from the package and put it the root of your memorystick
21. disconnect the psp and start Patapon and the hbl again
22. run pspfiler and go into “hacker mode” again
23. now open the REGISTRY folder in “ms0″ by pressing O
24. now press X for “system.dreg” and then O to copy
25. when the box appears, press the left or right button on the control pad until you get to flash1
26. go to REGISTRY and press Δ to copy (it will ask to overwrite, do it)
27. repeat steps 23. to 26., but for “system.ireg”
28. press the home button and exit to the XMB
29. it is complete

if ANYONE should have anything to add to these steps to make things easier, please notify in a comment.

PSP Hack: Font Mod for 6.20 OFW via PSP Filer and HBL

Similar Posts:

Recent Posts

Categories

Friends

Our Network Sites

Links