LCFW 6.XX PRO B10 Released

Share

Update: Custom Firmware 6.XX PRO B10 Fix has been released: http://pspslimhacks.com/psp-custom-firmware-6-xx-pro-b10-fix/

Believe it or not, the next revision of PRO LCFW is not entitled PRO C but PRO B10 and provides the usual bug fixes over the last revision. Once again a B revision outruns PRO C which is in development since B4. Here is the changelog I found on the internet (it’s translated from Chinese so it’s far from perfect):

  • [!]fix bugs: ISOCache infinite loop、unsupport>2GB ISO,and Need for Speed: Carbon Own The City track disappear
  • [!]ISOCache default 256
  • [!]fix PSPGo ISO VIDEO MOUNT problem in start game
  • [!]fix Recovery menu low probability halt,Recovery menu cpu speed not display 333/166
  • [!]fix problem in ISO file name (thx to popsdeco)
  • [!]fix ISO file size when mounting UMD through USB (thx to neur0ner)
  • [!]optimize order of the patch
  • [!]fix the problem of decryption code
  • [+]reduce FastRecovery file size,speedup fast recovery (thx to neur0ner)
  • [+]support Satelite and Recovery menu translation file,fonts can be changed
  • [+]hold R to disable VSH plugins when start XMB
  • [+]Recovery menu add Delete Hibernation and highlight effect
  • [+]support 2GB~4GB ISO/CSO

Here are some the most frequently asked questions about PRO LCFW:

  • What is LCFW ? LCFW a.k.a Light Custom Firmware is a custom firmware that is stored in the RAM as well as in the Flash0  and when the PSP is completely turned off it gets erased(only from the RAM). It’s the only CFW available for PSP 3000/GO/E1000 and PSP 2000 with TA088v3. It enables you to play PS1 games, PSP iso/cso games and to run homebrews and plugins.
  • Is there a way to make this LCFW permanent? If your PSP supports 6.20 OFW there is so called Permanent Patch that can make the 6.20 Pro B10 permanent and it’s supported by any PSP that supports 6.20 OFW. If you have PSP 1000 or PSP 2000 with non-TA088v3 motherboard you can also install 6.39 Pro B10 or 6.60 Pro B10 and install CIPL. This will make the LCFW full CFW.
  • What is Fast Recovery? After the initial installation of the LCFW there is easier way to turn it on. It’s to run the Fast Recovery.
  • Can I delete the files after the installation? If you have installed 6.20 Pro B10 with a permanent patch  or CIPL you can delete everything. If not than you can delete everything except the Fast Recovery.
  • What PSPs are supported?
  1. 6.20 Pro B10 – 1g,2g,3g,4g,5g,6g,downgraded to 6.20 9g
  2. 6.35 Pro B10 – 1g,2g,3g,4g,5g,6g,7g,9g
  3. 6.39 Pro B10 – 1g,2g,3g,4g,5g,6g,7g,9g
  4. 6.60 Pro B10 – 1g,2g,3g,4g,5g,6g,7g,9g,11g a.k.a PSP E1000( not yet tested )
  • I installed 6.20 Permanent Patch and got a file called vshorig.prx. What to do it? This is file that will help you if something with your PSP went wrong. Copy it somewhere save – on your computer for example.

So How to install 6.XX Pro B10:

  • Install the some of these OFW : 6.20,6.35,6.39,6.60 ( No matter if you downgrade or upgrade or you are on one of them already )
  • Download the version of the LCFW that corresponds to your OFW
  • Unrar both FastRecovery and PROUPDATE folders in PSP/GAME
  • Run the 6.XX PRO UPDATE Icon from Game – Memory Stick
  • You will see black screen like the one below. Hit the X button. When the installation completes hit the X button again.


  • You are now back to the menu with 6.XX Pro B10 installed.

How to install 6.20 Permanent Patch( This works only on 6.20 Pro B10 already installed and enabled) :

  • In the 6.20 Pro B10 archive you will find folder called “620PRO_Permanent”. Copy it in PSP/GAME
  • Run it from Game – Memory Stick on your PSP.( See below )

 

  • You will see a black screen. Press X on it. Then you will be asked if you want to test the patch. Press X again. ( See below )

 

 

  • If your PSP doesn’t crash and goes to the XMB you can proceed with the installation. Otherwise your PSP is not compatible with it and should stop trying to install it.
  • Run the permanent patch again. Hit X again on the first question but this time hit O on the second.
  • Your 6.20 Pro B10 is now permanent. You Will find out that you got a file vshorig.prx in your root directory of the PSP. Copy it somewhere save – for example on your computer. It can help in some cases of brick.

Installing 6.39/6.60 CIPL( This must be installed on 6.39/6.60 Pro B10 and only on PSP 1000 and PSP 2000 with non -TA088v3 motherboard. Otherwise this will cause a brick that can not be fixed.) :

  • You will find a  CIPL_Flasher folder in the 6.39/6.60 Pro B10 archives. Place it in PSP/GAME
  • Run it from Game – Memory Stick ( See Below ).


  •  You will see a black screen as the one below. Hit X and wait the psp to reboot.

  • You now have a permanent 6.39/6.60 PRO B10.

Source : [PRO CFW Official Site]

Download
Download 6.20 Pro B10
Download
Download 6.35 Pro B10
Download
Download 6.39 Pro B10
Download
Download 6.60 Pro B10

Similar Posts:

  • http://pspslimhacks.com/lcfw-6-xx-pro-b10-released/ yuseF

    is it ok to upgrade from 5.03 version to 6.20 pro-b10? i think 5.03 is an ofw not cfw. because i reformat my memo card

    • NeW 1

      First you have to upgrade 5.03 OFW to 6.20 OFW. Then you run 6.20 PRO-B10 as normal.

  • zack

    hi I have a psp2006 n the version is 5.50gen-d3.So do I have to update to version 6.60 to install 6.60 Pro B10?

    • newbie1

      I dont think u need to actually i bricked my PSP with the same CFW trying to update to PRO B8 but got it fixed but lost the gen now running 6.39 PRO b10 on PSP 3004

    • kathy025

      FULLY uninstall CFW 5.50 GEN-D3 first.

      Personally, I would suggest updating to OFW 6.35 and installing LCFW 6.35 PRO-B10 instead. I prefer a non-perma hack so bricking is at minimal. Not like it’s too hard to run the FastRecovery anyway after a cold boot.

      Better safe than sorry. :)

      • guest

        yes, he’s exactly right. but If you’re really to down on fastrecovery you can still perma it if u have psp 1k or 2k that is hackable.

  • Nash

    my skype isn’t working after this update

    • newbie1

      Try Nightly (PRO b9) it works fine for me and its more stable

  • Forte

    Hello. After I installed 6.60 ME-1.6, all of the game works great. However, whenever I go to system settings, my PSP stuck and it shutdown. It happens whenever I go to settings. I changed to PRO-10 in hope of solving this problem but no avail. Can you help me on this?

    TQ

    • NeW 1

      Load up 6.60 ME or PRO-10. Take out the memory stick and then go to settings. If it works fine then there must be something on the memory stick that is causing the issue (e.g. plugins).

      • Forte

        Hey it works! Thanks! Yes, it must be the plugins.

  • RusLionHeart

    IT WORKS ON PSP E1000 I HAVE TESTED IT. PERFECT THANKS!!!!!!

  • dylan

    can you put permanent on e1000?

    • RusLionHeart

      I haven’t try the permanent patch on E1000. But I think no, it will brick!

  • squiggs

    how do i use plugins on this for go. i even have the ef0:/ in the path and it still does not work

    • NeW 1

      I’m not sure but for some plugins, you might have to change the ms0 to ef0, normally via the text file.

  • Sun

    Just wondering, is E1000 still not tested? Thank you.

    • RusLionHeart

      Dude check my comments, I have tested it and it Works, but not the permanent.( Permanent Patch not tested – only CFW)

  • djemm1996

    how can i make Video Output on full screen? /6.20 PRO B10/

  • Venz

    Hi good day, i have a psp 1000 and it’s running on cfw 6.20 pro b5, my concern is i have an iso of god eater but i can’t get it to play, can someone hep me with this one, do i have to update to enable to play God eater, can i still play my other cfw games like nba 2k12, fifa 2012, angry birds? thanks in advance and God bless.

  • djemm1996

    Why i can’t log in into Skype? Logging in just takes forever.

  • http://shido69.blogspot.com Shido69

    Can this LCFW play multi popstation eboot game >= 2Gb ?

  • hsh1

    Many homebrew & some old PSX game not working after update from PRO-B9 to PRO-B10.

  • madkapa

    I install 6.60 PRO B-10 to PSP 3000. How can i play iso ?

    • madkapa

      Ok i found it, thanks anyway !!

  • jacd

    can i upgrade my ofw 4.01 direct to 6.20 ofw?

    • NeW 1

      Yes you can. I’m surprised you’re even using an old firmware :)

  • Rockerman

    Hi,

    How do you upgrade from one CFW to another?

    I currently have CFG v6.60 B9 installed, I want to upgrade to B10.

    How do I proceed?

    Thanks

  • H4X?

    I have a question. After you have psp 3000 6.20 pro b-10 installed , how to add plugins (if i need them) and how to run isos and csos ( i am so helpless ) please help.

    • NeW 1

      First you need to put all your CSO and ISO files in the ‘ISO’ folder which is in the root of your memory stick. Then you place all your plugins in the ‘seplugins’ folder. Whereas all your EBOOT files go in the ‘GAME’ folder, stored under the ‘PSP’ folder. Hope it helps.

  • Gamehunter

    i was wondering after you install 6.XX Pro B10 the first step is your psp now temporary hacked?

  • Zundox

    HYE, i now have version 6.60 pro b10
    the problem is when i put any game in the psp it doesnt show,,
    any one know why?
    answer me plz fast

    • NeW 1

      First you need to put all your CSO and ISO files in the ‘ISO’ folder which is in the root of your memory stick. Then you place all your plugins in the ‘seplugins’ folder. Whereas all your EBOOT files go in the ‘GAME’ folder, stored under the ‘PSP’ folder. Hope it helps.

  • Zundox

    well,first i had version 6.60
    so i took download 6.60 pro b10,after that i extracted the file in root of my memory stick
    then i went to Pro Update,after the update i went to pro cipl flasher but this is what has been shown “this installer doesnt support this model”
    so what should i do
    and neither thepro fast recovery doesnt work when i press on it it opens then it goes back to the (game-memory stick) and nothing

  • Zundox

    well now i installed 6.20 pro b10
    pictures work
    music , doesnt work i tryed to put some mp3 music but it shows always corrupted data
    games , only one game works but when i put another game it shows coruptted data

  • thermoshok

    i go to system information it freezez why? what di i do?????

    • MrZer017

      try removing the mem. stick before going into system info.. if it works it’s probably your stick :D

  • http://None Dharmesh

    HI – I’m new to this.. I just installed a 6.20 Pro B10. And I have a few .iso games.. How do I play them from the memory stick.

    • Zundox

      just make a folder in the root of memory stick named ISO and put the iso or cso games in it

  • john

    does this work on psp e1004 version 6.50

  • hitachixx

    i just bought this psp at bestbuy http://www.bestbuy.com/site/Sony+-+PSP-3000+Core+Pack+System+(Piano+Black)+-+Piano+Black/9175082.p?skuId=9175082&id=1218045569845 i am picking it up in 2 days and i just wanted to know if someone already tried to hack this one? is it 9g, whats the default firmware in it?

    Thanks :D

  • lol

    so newest psp can be hacked with this?
    even if i buy one right now at bestbuy?
    wich ones cant be hacked?

  • Dennis1293

    Where do i put the sdk folder? memory stick main?

    • Steven

      Hi have you figured it out yet, mine only says not supported for my system. the update works but it’s not permanent, i always have to launch? any help will do. thanks. steven

    • ChuckTeslaa

      The sdk folder is junk, you can delete it.

  • Dennis1293

    Every time i try running a umd it freezes and shuts off. The only way it works is if i remove my memory stick and let the game start then put it back in. I know the problem is the plugins but i cant pinpoint it! Should i format my card then extract the file to the system and start from there? any ideas?

  • Dennis1293

    ok i figured it out, if anyone runs into that same problem let me know, its 1am and i have school tom so i dont feel like typing it out right now

  • Arindam

    my psp has only one hack file “Pro update” and no other file like fast recovery etc

    • Dennis1293

      U need to redownload the .rar and extract it.then paste pro update, cipl flasher, and fast recovery into game, then seplugins and sdk folders to memory stick main. If you have a pre hacked psp i suggest formating the memory stick an then running proupdate

      • Arindam

        i have a pre hacked psp not from this site but i went to a market and gave my psp to a man to hack it. then he agave only one file “pro update” and while playing game my game stops in between and starts again and sometimes if i try to swith of the game the “please wait screen”
        appears and the game dosent switch off. i have to then take out my battery and start my psp again

  • Arindam

    i have my pro b8

  • Zundox

    hye,i have psp 6.20 pro b10
    i have a problem that when i enter in any game the psp automatic restart,,,
    anyone can help me plz?

  • dennis1293

    @Arindam and Zundox, i have psp slim(2000) i downloaded 6.6 pro b10, i have no flaws in the plugins th egames run great, plus iso and cso. Try restoring to ofw update to 6.60 then FORMAT your card, then download 6.6 then run the 6.6 b10. Let me know if you have anymore problems.

  • pspzzzz

    The psp scene is pretty much dead :(

    • psp zzzzzzzzz

      there’s always the nintendo 3DS. lol

  • https://www.facebook.com/SN080978 christopher manuzon

    ,hey, i upgrade my psp 2000 and 3000 from 5.03 to 6.20 then install the pro update. It goes well on the first try, even the recovery menu goes well. But when i try to install the permanent patch it goes back to XMB and says “the game could not be started” . so i run the flash recovey to go back to CFW pro B10. then i will try to fix it in the recovey menu, but i cannot enter to my recovery menu anymore,. when i click it ust nothing happens, and in my psp 2000 when i click the SELECT butto ,my psp hang ang crashes.

    still i can play my iso’s and cso’s games,. i ust want to fix my vsh menu and recovey menu and also want to install the “permananent patch”..
    really need your help to fix it!!!!! thanks a lot.

    • Thonglover

      Make you uninstalled the old/older CFW files.

  • Dennis1293

    hey, can anyone tell me how to get iso’s to run on this firmware?? please?

  • http://waptrick.com Daniel

    CIPL Flasher not working on psp 1000 6.39

  • Yoh

    does the CIPL 6.60 work on PSP 3000 ver. 6.60 Pro B10 ? Am not sure about this cause it said only on psp 1000 and 2000 without the motherboard ?Thanks in advance

  • YaZ

    just like to confirm that my e1000 is running 6.60 pro-b10 even when i turn it off and on

  • mts

    i have a psp 3004 slim version 3.90 which cfw best for me?

  • http://chipmunksdancehall.yolasite.com Bonds

    Ok i have install the update it works great and everything but when i am trying to install the CIPL Flasher For PRO-B it said that it doesnt support this model please help ASAP psp 3000 Og3 :(

    • YaZ

      i have the same problem (E1000)

  • aris

    tested on E-1004 WORKS FINE THANS SO MUCH PRO TEAM YOUR THE BEST

    • Derp

      With 6.50?

  • RIOT

    where do i put the seplugins folder in?

  • http://chipmunksdancehall.yolasite.com Bonds

    Cant someone help out the cant support dudes?

    • YaZ

      i think there may be an error in the cfw as many people have the same problem

  • stiffler

    Hey… i have just insatlled the 6.60 proB10 on my psp 3000. The problem is when i go to any of the settings in setting menu and try to opne it, psp hangs and shut down. Than i had to install the fast recovery again, the same problem come’s again after installion of the fast recovery. Any help would be very thankful

  • Allu

    is there crack software for psp 3004 version:-6.60?????

  • Yomo201

    Does anyone have any idea when the CIPL_Flasher will be compatable with psp 3000?

  • http://symbianfan.com Suprim

    Hi
    I have a Psp fat with 5.50 prome-3 does this work on my psp and what should i do to get this firmware

    thanks

  • budoy

    bro i’m a super dooper newbie! and i’m very scared to brick my new psp, just bought it a few days back. just want to know is this tutorial applicable to my psp 3004 version 6.39? appreciate it if you can tell me how not to brick my psp during the process

    • DAN

      just use light virsion you’ll be fine

      • Abhiram Viswamitra

        Hi Dan,

        I have a PSP 3004 9g with 6.60.I used the CFW 6.60 pro b10. When I try to run an ISO/CSO. It loads and then enters to a blank screen mode. no button what so ever works.
        Please let me know what else has to be done.
        Thanks,
        Abhiram.

      • dalton889

        I HAVE PUT BRO-B10 5g and after i have put cheat master,nitePR (i put codes but nitePR wasnt show to me) (syphon filter combat ops)…so il got to the point..As i said beofre after 4-5 days my psp’s green light was blinking while i was doing work with hack on PC.Then i realized that psp wasnt show the orange light when i connect it with AC cable…i scared so muchuch…i thought that psp wants a ‘relax’ so i left it on AC Adaptor for whole night..I woke up nervous about this problem..and the orange light was ‘OFF’…IN MY mind comes the  conclusion that psp’s battery was bricked or finished.I delete all things on my psp (including hacks,games,saves etc.) then i called the Sony of my coountry..i said to them that  my psp’s batterys it doesnt charge they ask me if its AC ADOPTORS problem  but dont worry i cahnge it too.! They said that they could give me a NEW ONE PSP GO (COMLETELY NEW) BY paying 59 euro with 1 year garantee.But i watn to hack my psp again..but the QUESTION IS? will CFW cause this facken problem or it was my batterys time ?….im here to give me your ideas or opionions,i would appreciate SO much if you could tell me if hack cause this thing or it was an originally problem ( i have psp go 2 years) pleaseee let me now….communicate with me email:[email protected]…PLEASE HELP 11
         

      • Fängs

        dewd, same thing happened to me. The AC charger is the culprit. Overhearting chargers so much ruin & burn electronic parts when left for so long.

        Left mine for 3days & had a “playing & resting-loopy” habit & shewt.
        I tried to replace AC charger & resurrected my seemingly broke PSP like sweetest charms.
        Also thought that my battery ran dry but nah. 

    • amareal

      it wont brick your psp..use 6.39 pro b10..dont download the 6.20 permanent and CIPL flasher.

      • LeeMae

        Would this work on my PSP 3004 3g 6.60? pls help :(

  • Phenom23

    so..i have a psp 3004 6.60…i have tried the LCFW..copied proupdate and fastrecovery…installed the Proupdate.ok..now i have 6.60 PRO-B10 model 09g..now my questions are…is this all i need to do ?  and if yes where do i copy my iso/cso games? because if i put them in psp/game they don’t show up on the psp..can you help me with this please ?:D

    • Bobby AKA BOBCAMO

      Hey Phenom23.
      You Put All ISO & CSO Files/Games in this Directory
      X will be what you’re PSP’s Memory Stick will be.
      “X:ISO”
      so in the ISO folder that’s where you put you’re ISO’s and CSO’s.
      if they are EBOOT games, usually they go into the GAME folder. “X:PSPGAME”
      hope this helps.
      FYI: i don’t yet have this Update on my PSP3001. about to do it in a few though.