Custom Firmware Enabler v1.0 – Load M33 CFW via ChickHEN
Custom Firmware on your TA-88v3 (PSP-2000 only!)
Fancy a bit of custom firmware on that PSP-2000 TA-88v3 motherboard? Well you can now as Xenogears and Becus25 of the Dark-Alex forums have released a M33 custom firmware enabler.
So what does it do? Custom Firmware Enabler v1.0 Temporary Loads M33 custom firmware via ChickHEN R2 to your PSP’s RAM, allowing many of the M33 CFW features to be used, however not all (for example play PSX games) Yes ISO and CSO files will run…..
This works on Ta-88v3′s and other motherboards. But NOT PSP-3000′s so please don’t try or you’ll brick your PSP.
Here’s the release notes from Xenogears and Becus25 (Translated from Spanish, so there are some errors)
What is?
A program that activates the functions of the M33 custom firmware using ChickHen.What do I need?
- A PSP Slim (Slim only works with, regardless of the plate you have)
- Firmware version 5.03.
- ChickHen R2 (minimum)Compatibility:
- The functions are the same with the 5.00 M33, all work except:
- Recovery (Se cree may be anticipated that an alternative power to set the homebrew CFW)
- Pops (PSX Games)Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
To be like this: X: / PSP / GAME / CFWEnabler / EBOOT.PBP
How to use:
Starts ChickHen from the picture section. Then start the homebrew called for CFW Loader ChickHEN.
The first time you need CFW to install modules into the flash memory with the option Circle (Do not override, simply add modules, it is a safe process.)
Then press X to start the CFW.
You are in a CFW!FAQ:
- Can load isos? – Yes, yes you can.
- Do you like my PSP Slim is fucking plate? – Yes, it does not matter.
- Does my PSP3000? – No, not working, at least.
- Can you break my console? – It is true that he writes some files in internal memory, but does not overwrite anything, so this is not problematic.
- When you turn off the console I have to repeat the procedure? – Yes, you have to repeat it, but do not have Flash modules each time.
- And you can not prevent either procedure? – Could be avoided if we could do an IPL compatible, so you need information PreIPL.
- Is expected to be in the future rectify the current problems? – It is possible, but is not guaranteed anything.
- Is expected that a future compatible with PSP3000? – You might try, but is not guaranteed anything.
- Does the M33 SDK? – Yes, it works.Acknowledgements:
- A Dark_AleX for the M33 modules.
- Especially him, who knows who he is, and that is part of the credit for helping him.Un Saludo.
Thanks to anonymous for the tip!
Source: dark-alex.org
Similar Posts:
- None Found