Custom Firmware Enabler 3.01 – Now Supports PSP-3000

README.TXT

CustomFirmware Enabler 3.01 to 5.03 ChickHen by Xenogears and Becus25.

What is?
- A program that activates the functions of the M33 custom firmware using ChickHen.

What do I need?
- A PSP (Model 2000 or 3000)
- Firmware version 5.03.
- ChickHen R2 (at least, look out with the patched versions may cause errors!).

3.01 Changes:
- Fixed a bug that prevented loading plugins VSH.

3.00 Changes:
- Added support for PSP 3000.
- Improvements in GUI.
- Added update system over the Internet (Wanted host).
- Added system to block the official updates.
- Added new configuration options
– Free UMD Region.
– CFWEnabler Online Update.
– Hide Pic0.png & Pic1.png.
– Use version.txt.
- Fixed a problem that crashed into the console when plugin is not detected.
- Added registry Hacks (Change buttons, Enable WMA, Enable Flash Player)
- Added a menu to set the version.txt.
- Added a menu to set the speed of the CPU (VSH and Games).

2.51 Changes:
- Fixed bug that prevented either activate the plugins.

2.50 Changes:
- Fixed bug that prevented version and patching of the hen to leave a game.
- Improved system pops, now you can install a flash version (whatever that is 5.00)
- Fixed a bug that prevented either activate the plugins.
- Improved detection system version, you can install over previous versions (not recommended).
- Improved detection system model, no longer crashes with modified versions of the hen (original versions are recommended to avoid problems.)
- Fixed a bug that crashed into the setup menu randomly.
- Improved the patching ChickHEN system, you no longer need this in a folder called “ChickHEN.
- It is not necessary that the folder is called CFWEnabler.

2.10 Changes:
- Fixed a problem when you change settings for the plugins.
- Fixed internal problems.
- Fixed a problem that caused a crasheo accessing plugins and have no plugin.
- Improved detection of release.

2.02 Changes:
- Fixed a bug in the installation of the Pops (The PRX MD5 is different on each console, so the test worked, but then not)

2.01 Changes:
- Fixed a bug not detect either a previous installation (caused that could not be installed above the new version)

2.00 Changes:
- System pops native activation.
- System configuration Custom Firmware.
- Verification MD5 of files that are installed in flash, if you have not installed either, re-install.
- Nice interface.
- Safety flasheos unnecessary.
- Protection from ChickHen load the Custom Firmware.
(It is necessary that this ChickHen in a folder called “ChickHEN inside Photo or Pictures.)
- Changed version of the system (now shows 5.03 M33)

Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
Example X: / PSP / GAME / CFWEnabler / EBOOT.PBP

How to use:
Starts ChickHen from the picture section. Then start the homebrew called “CFWLoader 3.01.
Follow the instructions that tells you the program.

Internet Update:
Time of this release, this option is disabled by lack of a server.
If you have a server and are interested in helping, please contact CFWEnabler@gmail.com

FAQ:
- Can load isos? – Yes, yes, you can.
- Do you like my PSP Slim is fucking plate? – Yes, it does not matter.
- Can you break my console? – This version has several checks to verify that everything is installed, it is 99.99% safe
- When you turn off the console I have to repeat the procedure? – Yes, you have to repeat it, but after the first time, no longer flashea anything.
- And you can not prevent either procedure? – Could be avoided if we could do an IPL compatible.
- Is expected to be in the future rectify the current problems? – It is possible, but is not guaranteed anything.
- Does the M33 SDK? – Yes, it works.
- Are the plugins? – Yes, they work.
- Can I install LEDA? – Yes, it works perfectly.

Common Errors:

- When you start the program automatically goes to the menu –
It has not been able to reallocate the flash, make sure your version is correct ChickHen.
- I do not run the isos –
Make sure that your configuration is correct.
- I created a folder called SVCPlayer Why? –
You have a plugin that creates the so-called “capture” nothing to do with CFWEnabler.
- Other errors is important to check the plugins that are loaded can cause problems. Also, check your version of ChickHen is correct, but may fail.

Activate Pops:

To enable compatibility with Native Pops, it is necessary to remove some modules of an Official Firmware.
In this version you can flash any version of the Pops, but only 5.00 is recommended, other versions have not been tested.

– Required –
– A PSP that enables homebrew loading.
– An update Sony.
– PsarDumper. (http://rapidshare.com/files/165390935/psardumper500_3000_too.zip)

1.-The PsarDumper copy of our report.
2.-copy the firmware to the root of the PSP under the name “EBOOT.PBP”
3.-execute the PsarDumper.
4.-click on “X” and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-looking pops.prx files in the folder and popsman.prx kd (in F0)
7.-The Copy To Folder Pops within CFWEnabler
8.-Run the CFWEnabler.
9.-click on the option “Flash Modules Pops.”
10.-We followed the instructions.
11.-Done, and you can delete the files from the Memory Stick Pops, both the EBOOT.PBP and the F0 folder as the files in the folder within CFWEnabler Pops.

Warning: Using the Firmware M33 can be accessed freely by the USB Flash0 care because you can cause a brick, you are advised not to change anything to the internal memory.

Acknowledgments:
- A Dark_AleX for the M33 modules.
- A GENyUS for his A-GEN

FIRST INSTALL FIRMWARE 5.03 ON YOUR PSP 31000

yeah just install v2.10 of CFWE then install this and you’ll be fine.Ive done it so theres definatly no brick :]

CFW3.01 has Uninstall option on the Menu. Select it & confirm to delete CFW files from Flash0. I’ve done this already & everything is ok.

Wondering the same thing.. Almost all who successfully installed it are PSP 2k users..

Nope..

dont use the chickhen mod!!! use only chickhen r2 unmodded. its clearly stated