Hi All,
I’m using PSP 3004 original firmware 5.03.
Mobo version (checked with PSPIdent 0.4) is TA-090v2, Brite 03g, Data Code 8D.
Has some tried to run CFW and install Custom Firnware on it?
I don’t want to brick my new toy….

thanks in advance

Yes you have exactly the firmware you need to run cfw do not update yet! So first you download chickHEN R2 follow the instructions in the readme. Make sure u get it to work, it will say 5.03 chickHEN R2 in system software. Now you can load Homebrew. Then download the file from this download site. Follow the instructions in the readme file, always. After that you will have a screen that looks like the one at the top of the page when you click on the CFW enabler icon in your games menu. Flash and start, and you can now load ISO CSO files.

[...] this instead of 5.03 Gen-A. It is know to have many bugs/issues. Install CFWenabler 3.60 instead. Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks When you load CFWenabler, hold R. Then choose uninstall. This feature will uninstall Gen-A. Then [...]

[...] If you are running ChickHEN R2 I believe the easiest way to install CFW is to use CFWEnabler: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks [...]

i downloaded the file but the readme is in spanish. can this be fixed?

[...] 3000, it unhackable. But partially hackable, so you can run CFWenabler3.60 instead of full CFW. Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks (Never attemp to Install full CFW. You will brick your [...]

I can see that tis method of putting your psp in cfw means you cannot shut your psp down. The very same with cfw gen-a. But is there a way on one of these methods to set CTF themes?

Hi guys,

I’m using PSP 3006 with chickHEN R2 and CFW Enabler 3.30. The problem is only God knows how much i have to try to run the chickhen thing. And even if its works, I can only play a game or two before the system reboot to the original firmware. It annoys me much. Please can somebody help me? It sounds simple but it just doesn’t go away! BTW iim not using pandora battery.

I heard that CHICKHEN R3 is coming out soon.And it will work with psp3000 vers5.50.
and if i download it and install it into my psp, do u think that i can download this custom firmware enabler?
plz write back its soo important to me =)

question… i have cfw enabler 2.50 and i want to update i to the latest version which is 3.60… can i update directly to 3.60 and skip the other versions that were released before 3.60?? i’m confused.. tnx!!

sry if im a noob but i need sum help. how do you run plugins on a cfw enabler 3.6 on a psp 3000?

oh and what’d happen if you try to install permanent custom firmware when running cfw enabler?

are they not making an update of CFWE?like 3.61 or 3.70?

[...] If you was to install this you would have bricked our psp. PSP 3000 can run CFWenabler only. Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks This is for your PSP [...]

[...] said that the system info says 5.03m33 which is an older version of the CFWe, try this one: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks if u use this version its mean to say 5.03 MHU which is the same as 5.03m33 just newer. GEN-A is a [...]

Will this work on the psp 3000 im a noob and will it have any problems?? and when I have games like cso and iso where do I put it please give the exact thing like not just imagine :in the you folder but where do I create a you folder? and also where do I put psx games? please I know im a noob so please help me and I need 5.03 right?

Hello,

I have a PSP-2004 TA88v3, i got chickHEN R2 loaded on OFW 5.03, and for the first time when i loaded CFWe 3.60 it worked just fine, but then later my battery ran out and i had to reload chickHEN, but now when i try to run CFWe 3.60, the PSP crashes after showing a blank screen and does not reboot. I have tried this many times but without any luck it keeps on crashing. Can you pls tell me whats wrong and how can i fix this.

Also to clarify the PSP is not Bricked, its just that the CFWe 3.60 does not load.

Looking forward to some help pleaseee…

[...] you need to download and install cfwenabler 3.60. you can get it here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks you can follow this guide for installation: Complete CFWE Guide from Start to Finish w/ [...]

A quick step for PSP3006 owners:

Preparation steps:
==================
1. Check PSP3006 that it is on system firmware version 5.03.
2. Download from Chick HEN R2 and Custom Firmware Enbler v3.60 and unzip them.
3. Get a small and fast memory stick and formatted by PSP3006.
4. Copy whole ChickHEB folder (which contains 4 gif files ChickHENa-d and slim.tiff) into PICTURE directory of the momery stick; Place h.bin in the root directory of the memory stick.
5. Place CFWEnabler folder into the memorystick’s \PSP\GAME\
6. Insert Memory Stick into PSP3006

Activation Steps:
=================
1. Restore PSP3006 to the factory defaults
2. After self-reboot from the restore, enter system default language, time, name, etc. and confirmed (the screen should be in Black & White.)
3. Check and set UMD options are all “off”
4. Check system version = 5.03
5. Go to Photo and memory stick by pressing “o” button only. Let the system to read and display the gif and tiff files automatically. Don’t anything. After a few seconds, the screen should flash and self-reboot.
6. Note: If no self reboot, then the ChickHEN load is failed and you can retry the above or seek someone else to help.
7. After the self-reboot then check system firmware version. It should read “5.03 ChickHEN R2”. Otherwise, the ChickHEN load is failed and you can retry the above or seek someone else to help.
8. Go to Game and memory stick and press “o”, you should see”3.60 CFWEnabler”. Press “o” to activate CFWEnabler. Donot press any and just wait forPSP3006 to self-reboot.
9. After the self-reboot, check system firmware version = 5.03MHU.
10. If yes, then 3.60 CFWEnabler is installed successfully.
11. From here on, donot perform full power down. Standby Power Down is OK. But donot let PSP3006 completely drained.
12. Otherwise, you need to restart the whole process from top again.

Note: the whole process is very safe and does not impact your original PSP3006’s system firmware. Anytime, you can perform the system restoration back to the factory defaults.

Hello Guys,

I just thought its important to post this here, please be sure that you don not Overwrite a CFWe 3.60 with
Gen-A or vice a verse without uninstalling the previous one at any point of time, because some times it causes problem and would not allow you to load Gen A or CFWe and the later keeps on crashing, it seems some problems occur when you re-flash the CFW. In case you have done this completely switch down your PSP and don’t try a reload for a couple of days (at least it worked for me). Then try loading a CFWe 3.51 which will ask you to uninstall the previous Flashed CFW, click on uninstall and then re install CFWe 3.51 this should hopefully install the previous CFWe, you can then repeat this last step again with CFWe 3.60 to restore you latest CFWe.

Hope this helps, in case some faced a similar problem like me

[...] if you go to system settings and view the version) Now download Custom Firmware Enabler v.3.60: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks Put the cfwenabler folder in your GAME folder (/PSP/GAME/) On your PSP go to Games and press the [...]

Hey guy I just Install 3.60 but it seems I can’t run PSX game anymore anyone can help me

Does anyone know how to make CWCheat work with the ChickHEN R2 plus this CF Enabler on a PSP 2000 with the ta88 V3 mobo? i can already play iso games but i can’t get the CWCheat working. thanks in advance!

[...] are only partially hackable, so you have to use cfwenabler 3.60. you can get cfwenabler 3.60 here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks this is the guide i would suggest: Complete CFWE Guide from Start to Finish w/ Screenshots since [...]

[...] as emulators) as well as play legal umd and ps1 backups. you can download cfwenabler 3.60 here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks as always, the instructions are in the readme file. your one step away! dont give up now! [...]

[...] cfw) it says 5.03 MHU – MHU are the people who made it based on m33 code. please download this one Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks 3)then place it in PSP/GAME as before 4)reboot you psp to remove the cfw 5)run chickhen… 6)upon [...]

[...] cfwenabler? you might try downloading and trying it again. you can download cfwenabler 3.60 here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks __________________ http://ultimakillz.blogspot.com/ [...]

[...] Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks and this guide: http://kefler.110mb.com/index.html since youve already got chickHEN loaded, you can skip those steps. cfwenabler 3.60 resides completely in your psps temporary ram memory, which is erased everytime you turn off your psp. both chickHEN and cfwenabler 3.60 will have to be reloaded everytime. this also means that there will be no evidence of you ever having a cfw. if you do need to get rid of everything, there is an uninstall option under the cfwenabler 3.60 menu. hope this helps. __________________ http://ultimakillz.blogspot.com/ ——————————— [...]

[...] 2. hrs ada Custom firmware nya bisa donlot di sini http://pspslimhacks.com/custom-firmware-enabler-3-60-released/ [...]

[...] then you might want to give cfwenabler 3.60 a shot. you can download cfwenabler 3.60 here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks and this is the guide for you: http://kefler.110mb.com/index.html hope this helps. [...]

i need help please
i ‘ve install chickhen r2 and install Custom Firmware Enabler 3.60 ,but after 1 minute the picture in the screen of my psp is tremble/shaking does anyone know what is my problem?
i really want to use cfw on my psp
i have psp 3001
all answer will be appreciate
thanks

yo!
does some1 knw if there`ll be any update of cfe….so as to get cfw 5.55 or higher??…..

Hey, just wondering, I saw that the Undead Knights demo also posted on this site is said to world with 5.5 gen as long as you use version.txt

release:5.55:
build:3230,0,3,1,0:builder@vsh-build6
system:52556@release_555,0×05050510:
vsh6434@release_555,v52629@release_555,20090608:
target:1:WorldWide

I saw an option for version.txt in the CFWE 3.6 recovery menu, and I was wondering if it was possible to use version.txt with CFWE 3.6. If it is, where do you put the txt file? Any help is appreciated.

Thanks

G

please help …………………………..!
how to reset to ofw, i made a mistake i install cfw enabler 3.60 and
my psp was shut down and i install the cfw gen A and now the picture on the psp screen is trembling
please help
thankssss

[...] PSP, then GAME. any files associated with 5.03 gen-a, delete them immediately. now download this: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks disconnect your psp from you computer, or remove your mem stick from the card reader, and load [...]

[...] yes. I suggest you use this guide: http://kefler.110mb.com/ and use this CFWEnabler 3.60: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks and of course, ChickHEN R2 Mod 2 for easier loading: $k0 AdvancedPSP.tK $k1 • View topic [...]

[...] luca00555 I got the same problem 5.03 gen-a have some bugs try to use cfw enabler 3.60 first Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks __________________ How many PSP's did I hack so far? (I'm a 5.50GEN-B2 User btw) 2 Fats, 1 Slim [...]

Is it safe to use this on PSP-3004? When I try to run it, PSP says “To proceed, you need to install custom firmware in flash”

I thought flashing anything in PSP-3000 means brick?

[...] you may want to try updating your custom firmware to cfwenabler 3.60. you can download it here: Custom Firmware Enabler 3.60 Released / CFWEnabler 3.60 Released, PSP Hacks – PSP Slim Hacks this guide may help: http://kefler.110mb.com/index.html you can follow the instructions for [...]

the moment you press flash and start it says “error writing the file” helpppppppppppppppppppppp