Custom Firmware Enabler 3.30+ Tutorial

Sunday, June 14th, 2009

Select install and your PSP will reboot.

CFWEnabler 3.30 menu screen.

This is a quick tutorial / guide to running Custom Firmware Enabler 3.30+ on your PSP-3000. We have two choices for CFW on our PSP-2000 TA-088v3+ models and PSP-3000′s. Either 5.03 GEN-A or this custom firmware. We’re now swaying towards Xenogears and becus25′s CFWEnabler as the updates are rolling out quicker, it has less bugs and a pretty menu system for enabling the various options.

You need official Firmware 5.03 installed to begin (ChickHEN needs this fw version)

Install ChickHEN R2 and get that running, use our tutorial and guide located here: Guide to running ChickHEN R2 on your PSP-3000 / PSP-2000 TA88v3+

Now download Custom Firmware Enabler 3.30 and install this to your PSP Memory card. put the file CWEnabler folder in PSP/GAME

With ChickHEN R2 loaded in your PSP XMB go to GAME, Memory Stick and then load CFWEnabler

You’ll boot up into a CFWEnabler screen, Select install and your PSP will reboot.

After which your PSP will reboot into 5.00 M33-6 CFW! Easy as pie!!

In order to enter the setting and configuration menu (Recovery menu) Simply run CFWEnabler from your XMB again and this time hold the R shoulder button. You’ll boot up into the menu screen (top)

Here you have the following pretty menu’s:

Custom Firmware Enabler: Your main Config menu

Custom Firmware Enabler: Plug-ins

Custom Firmware Enabler: CPU settings

Custom Firmware Enabler: Registry Hacks

MAC address spoof turned on. XMB effect only

The above screen demonstrates the MAC adress Spoof, so its not visible in the XMB. Good for screenshots like this. We haven’t gone into the Pops flashing as CFWEnabler 3.2+ supports native PSX/PS1 emulation and its pretty good.

Similar Posts:

None Found

Tags: PSP Tutorial

Posted in PSP Tutorials

eNteNg

Nice..
http://casfadfdas eNteNg

not bad …………
abhi

Hey will it remail in cfw forever

gurbz

If you mean these features without ever having to update then you should experince no problems.

YEPEEEEEEEEEEEEEEEEEEEEEEEE!!!!

i love the cpu settings……my games load so much faster now that i have set the speed to 333/166
YEPEEEEEEEEEEEEEEEEEEEEEEEE!!!!

hey whats the cfe_loader.prx [pops]???…..i am playing psx games but i dont have that in my plugins menu??? anyone got an answer???

http://pspslimhacks.com/ PSPFan

You don’t need to worry about that if the native 5.03 pops plays all your PS1 games without issues. leave it at that. Flashing pops is if you want to use other versions.
Joedakeys

thos plugins are diffrent. they dont show, but if you’re able to play psx then they are working just fine.

n00b

Hi, I have a problem. Is it normal to turn CFW3.2 I must first turn on the 1.0 version?

http://pspslimhacks.com/ PSPFan

makes no sense! ? uninstall the old one first. Run it with R held down. Uninstall then install & load 3.3

n00b

When I want to install the 3.3 (not 3.2, sorry) pops up an error. To all I have to start work CFW 1.0 and then 3.3 … why?

http://pspslimhacks.com/ PSPFan

What type of PSP? You need 5.03 official firmware and a psp-2000 TA-088v3+ or psp3000

Salman

I have installed CFWEnabler 2.10 already, how do I update to this 3.30 version. Will it brick if I just try to run this? I don’t have access to Wi-fi, so can anyone help out?

http://pspslimhacks.com/ PSPFan

Uninstall the old one to be safe. Run it with R held down. Uninstall then install & load 3.3

hjacked…

Hi there, is there anybody here got this running on psp2007 or 3007 coz until now i can’t still load chickenR2, and of course im sure i’ve followed all these pretty damn instructions carefully…please help:-(…thanks!

Joedakeys

Try the ChickhenR2 mod, there’s a link in Kefles Guide. go to forums/userhelp/kefler complte guide.

hjacked…

Is there any chance that we can have pandora like tools so it’l be more to instal CFW with these new mobo version, lastly, what happens chichenR3 by the way? Any updates?

Joedakeys

I think that with the new mobos, Sony has somehow managed (to put it in simple words) cut the circuts that allowd use to dirrectly activate custum IPLs from ms0:\ the batteries can be issues a command code to do this. With all that we could then flash custumized IPLs, Firmware & new assigned signature codes, But on these new mobos, until they realy are sure they could do this, they wont bother making compatible IPLs. I mean, why even bother if there is no safe way to put all that in there without the slitest chance of not bricking the PSP.

We’re all hoping to be surprise with ChickheR3. Everyone is expecting for it to load on its own, and for it to Auto start CFWE, at least. Something like pretending to be an IPL.

Mr_Rice

is this version really working and it will not brick PSP-2000 TA88V3. Need some video as tutorial if possible please provide some…!!! kung mugana ni palihug uplod og video para mo tuo mi dili kanang puro ra text..?? mga humbugero mana ang uban?? hoy mga bisaya react mo?? ayaw palupig..abi na lang, naaaa??

eNteNg

yotz, ok yan nagana nman sya ehehe…

BILL

B from CDO:
-VISAYAN-
hmmm… gusto pud ko mag-try ani.. PSP 3000 akong PSP.. dili man jud ni xa maka-brick ba?

-ENGLISH-
hmmm… i really want to try this out.. i’m using a PSP 3000 .. this won’t brick my PSP, right?
http://deleted eNteNg

it wont brick your psp as long as you know what you’re doing… =)

Manny “PACMAN” Paquiao

Bisaya. Ka? Tagalog ako! Haha. You know!!!?

Bu-Meshal

gooooood
psp 30001

this is working on psp 3001 /TA090V2?
psp 3001

this is working on psp3001 motherboard ta-090v2?
Jhazky

LOL! I thought this is an another update.. The last one was just few hours ago..
Jhazky

How come the plugins menu is functional in that screenshot?
Pek2

all with 3k psp yup its working coz i tried it already..i have the 3001 ratchet and clank piano black..=) but be sure to uninstall any version of cfwe first b4 flashing a new one to b safe….

Jhazky

Ratchet and Clank is silver..

Pek2

i got mine black.. i got the package with the national treasure umd and ratchet and clank game…lols dunno but important that it worked..hehehe

http://www.shit.com pls help

pls help.i have 5.03 GEN A, but my LCS Rip is lagging.
can i install CFE 3.30 over this? if yes,how?
is it safe?
wich one’s betr-GEN or CFE?
pls help….

http://pspslimhacks.com/ PSPFan

Yes it works. We took these print screens on a PSP-3002
Joedakeys

No. shutoff u’r psp, run the chickhenr2, then run CFWE. click uninstall. Re-enter cfwe and install. get pops.prx & popsman from 5.00 with psrdump & place them in pops folder in the cfwe folder. Refer to Kefler’s compltet guide for a full detailed instuctions.

http://www.shit.com pls help

shud i unistall GEN ? pls help me

iluvpsp

yes u should unindtall GEN first by holding the R shoulder button when booting in the CFE menu and then select the uninstall option.CFE is better than GEN in some ways(like the no. of options in the config menu and also it has less bugs but GEN can load plugins better.
Joedakeys

read my reply on #17

PSP3K

Can i install it on 3000 ? I had installed gen-a first on my psp now is it safe to install this one over it? Don’t i need to uninstall gen-a first?

Joedakeys

No, read my reply on #17.

inutil

so pwede rani i fully shutdown nya dli na ireinstall ang cfw og hen? translation: so if i fully turn the psp off, do i have to reinstall the hen R2 and this cfw? heh?

http://deleted pesteng yawa ka!

tok! nid pa ulet i run ung chickhen ska cfwe.. hnd pa sya permanent! ang tanga mo nman! bobo!

PSP3K

I had installed gen-a first on my psp 3000. Now is it safe to install this one over it? Don’t i need to uninstall gen-a first?

Pek2

uninstall gen-a first b4 putting cfwe 3.30..to be safe…
PSP3K

How do i uninstal that

Pek2

Fully shutdown your psp to disable gen-a then power on your psp then run chickhen r2 first then on Chickhen r2 now put cfwe 3.30 on PSP/GAME/CFWEnabler then exit usb mode and run it and on cfwe menu you will see an unistall option choose it to unistall gen-a and after go back load cfwe again and flash it to install..thats the way i did it..be sure you are on chickhen r2 first before enabling any homebrew applications..=)

Joedakeys

Yes. read reply #17

inutil

imung mama bobo

http://deleted pesteng yawa ka!

putang ina ka! bayota ka! bogo!

inutil

bagay ta bah,
prokopyo

hoi mga chocolate

http://deleted pesteng yawa ka!

bakit pokwang?

Manny “PACMAN” Paquiao

You know!!!? Hahaha. Pogi ako!

PSP3K

How do i uninstall that?

Jhazky

Just run CFWenabler and there’s an uninstall option.. It will uninstall CFW flashed on your PSP whether GEN-A or CFWe..

DOOM312

why on system settings i have version 5.03 m33-6!it should be 5.00 m33-6 right?

Pek2

nope 5.03 m33-6 should be displayed…=) its the right one if you are using this CFWE…

H.A.C.K.

Hey where is the uninstall i dont see it

Pek2

are you on CFWE? if you are then you wont see..i think it only shows when you fully shutdown your psp and boot chickhen r2 and the cfwe again…an uninstall option will appear..

JSTHIR2ASK

Can i play PSP games with this? (ISO, CSO)???? thnx in advance

Joedakeys

yes, and also PSX games

Cfnfnfw

I like this cfw better. I got this working on all of my psp’s (2001v2,2001v3,3004) with 100% working homebrew/iso/cso/pluggins

Cfnfnfw

and psx

http://www.google.com.au Villain

How do you play iso/cso with this fw i have set umd mode to m33 driver or sony np9660 but everytime i try to load iso/cso it says corrupted data
any clues?

Joedakeys

Make sure you made an “ISO” folder, and place them there.

Joedakeys

Sorry. On Root of MS

3001

just to be on the safe side..
If i’m running CFW Gen-A 5.03 on my PSP 3001, Can i change my Firmware to CFW Enabler 3.30? If Yes, How? and wouldn’t it affect my flash stuff inside the psp since the gen-a said something about flashing firmware into my PSP 3001? can someone explain clearly here? thank you. i guess this firmware’s much more efficient. it also has the option to enable WMA Playback.

Joedakeys

Yes you could do it. Follow Keflers guid into doing everything. There is a link on top.

Joedakeys

The link is on top of the 3.3o update announcement.

DILEN

wer shud i put the plugins?

3001

in ur ass little boy…

LiTtLeJ

Is this better than the GEN-A????

f2

u are such a noob

Joedakeys

Sure it is cause it wasn’t stolen.

omed

does this mean that when i completely off my psp and turn it on it would be a custom firmware or do i need to load it up each time?

Joedakeys

Recommendation: keep it on sleep.
One good thing is, that you don’t have to re-install CFWE. You just have to staert it.

TRo0per

Hey,

I did everything according to the tutorial but when i go to flash it, it wont let me. It says error flashing like 5 times then kicks me out of the program. Any help here guys?

Joedakeys

Did you have gen-A a installed, and if so, did you uninstalled it?

JSTHIR2ASK

HELP! I wanted to play CSO or ISO games on my PSP3K. What do i need to do this? I already have Hen R2 and CFWE3.30. HELP HERE PLSSSSS

Joedakeys

Make an “ISO” folder at root, put them there. make sure that that UND iso mode is on M33 driver.

JSTHIR2ASK

I have already ISO folder and inside it is an .cso game.. System software is 5.03 m33-6.
but when i select the game it says “the game could not be started” hlp here plsss

bil

does it work with chickhen mod?

Joedakeys

Yes it does.

Joedakeys

@JSTHIR2ASK, did you pressed select at the XMB and selected umd iso mode “m33 driver”?

If not, do that.

JSTHIR2ASK

Wow GEE! tnx man! its working now… have another question, what with theSonyNP9660? what thatand OE isofs?

Joedakeys

I’m sorry, didn’t realy catch that.

JSTHIR2ASK

@Joedakeys
at the UMD ISO MODE: there are some selection beside the M33 Driver. the SonyNP9660 and OE isofs what is this settinggs for??

Joedakeys

Gottcha. They are other drivers. You must switch them as needed. Right now you are using CFWE with the M33 modules build by Dark-AleX. That’s why to run iso and cso on you’re new 5.03 M33-6. M33 drivres must be in effect.

JSTHIR2ASK

AH I SEE! okay another question if you dont mind “noob here ” whats with tje USB DEVICE settings? hey if you know a site regarding about my question can you put it here so that im not disturbing you or something.. thnx really man!

Joedakeys

Be carefull with that, since that opens a back door to your device’s protected system folders. Any modification to thoes files will brick your device. Unless you know what your doing. This is the case for these new mobos, where there is no fixing them by superficially messing with them while the system is still off. You only could do that with older models. Read my reply on #9. Safe to use MS & UMD Disk.

JSTHIR2ASK

okay. my USB DEVICE: is set to Memory stick…. does this mean that i can only play games on my Stick? and i cant play with UMD disc?

Joedakeys

you’ll be able to go to umd at game and still start it even with the m33 driver. but if it don’t switch, unless it does it on it’s own. one thing though, before running ISOs make sure you have the m33 driver. ocationaly it has switch on some people.

Joedakeys

@JSTHIR2ASK, if you need to run psx games psx=ps1, or plugins refer to the best tutorial i’ve used, Keflers. Go to Forums/user help/Kefler’s conlpete guide. If ??? let me know!
B

a month ago i went to put CFW on a friends PSP…that is when i learned about all this PSP 3000 crap.I felt bad cuz i couldnt help the dude…meanwhile im running DAs firmware for awhile.so this come as good news …now i can hook my buddy up…I got his PSP and im ready to follow the guide.2 questions before i start…while ive done stuff like this before…I’m sure not as versed as some of you guys…so i like to be extra careful.
first…..once the new CFW is running…after i run through this guide….will the CFW be able to be updated through the XMB like DAs…or is only available via PC?
Second….how stable is the new CFW so far overall?…to any who have done this…

any replies will be greatly appreciated
B

Joedakeys

CFW & CFWE are two different things, hope you know. What this mean is that your friend will be running this differently. His psp must be at OFW 5.03, so upgrade if you can but not through the psp. If higher than 5.03 forget it, it wont work. When you’re ready to do this you must first run chickhenR2 for a homebrew enviornment. Then install CFWEnabler. However, if you want the CFWE to stay you must keep the psp at sleep only. If you completely shut it down, you will have to run CHickhenR2 then start CFWE againg. No-reflash, just start it. For iso put cso/iso in a iso folder@root and put the umd iso mode on m33 driver. yes it is at most stable. Yes they will have somekind of network update system in place.

B

so this is just an “enabler”….it allows CFW to be run kind of overriding the OFW?
and it doesn’t actually flash the PSP permanently with CFW?

thanks
B

sam

ok i bet im gonna get a lot of crap about this but here goes – is it safe to install CFE 3.30 directly over GEN-A without uninstalling? this is what i did but everyhing seems to work ok – i also deleted a folder called “files” from my Ms root – was this safe to do? i assume it was from GEN-A

Joedakeys

Hope U didn’t mess anything up that you haven’t notice.

Joedakeys

@JSTHIR2ASK, Sorry, I answered your question refering to something else. Yes, you’ll be able to run your UMDs @game UMD no matter if umd device is set to MS.
Joedakeys

@B, Ain’t that a little demon possessing your PSP. While the majority off people that are doing this want it permanantly, there are some who rather keep the integrity of the psp & still have these goodies.
INDIAN

fake
Joedakeys

@everyone, CFWE & Gen-A are not bynaries. Don’t install one on top of the other for no contamination. Think of them as both being males.

pathofneo

LOL

B

so this HB is just an “enabler”….it allows CFW to be run kind of overriding the OFW?
and it doesn’t actually flash the PSP permanently with CFW?
but will stay intact as long as the psp stays in sleepmode…otherwise i will have to repeat this guide ?

thanks
B

Joedakeys

It flashes some files that get incorporated with flash0 to have the full potential of a CFW. In the case that you shut off, you would have to run ChickhenR2 and just start CFWE “not-reflash files”. It is a simple process and worth the pain.

Erik

Great Job, i didn’t need to make a pandora battery, games works great, fine and smooth, i had v3 mother board, no problem on install (just follow exactly the instructions) only had problem hombrewing my console but everything solved when i took off the umd i had on the deck and everything went on.

Thank you so much again.
JSTHIR2ASK

got it! thnx man

Custom Firmware Enabler 3.30+ Tutorial

Similar Posts:

Recent Posts

Categories

Friends

Our Network Sites

Links