Custom Firmware 5.50 GEN-D3 “Final build” Released

Share
Custom Firmware 5.50 GEN-D3 Final Build Released.

Final Build Released.

Team GEN have released Custom Firmware 5.50 GEN-D3 “Final” build aka 5.50GEN-D3 -2. Why? Well it seems there were a few bugs present in the first release published. This final build is a quick fix of the current 5.50 GEN-D3 found. Only one game remains unplayable on this CFW and thats God Eater. Still pretty damn good if you ask me. Your safe to overwrite the first release flashed with the one below. Just download this and place it in the update folder and run it again, Install 5.50 GEN-D3 once more and your done.

Changelog:

5.50GEN-D3 “Final” Changelog

Improvements in the final version:

* Fix for bug eliminate the VSH menu, everyone can now enjoy the contents of its Memory Stick
* Update on backups that were seen as corrupt.
* Improved speed of access to Memory Stick during a game session
* Added support for IRSHELL D3 which will release shortly.

Only God Eater worries arise again, but we can hope that this update should address everyone. During this long day, we noticed that a lot of problems stem from improper installation, and we invite you to read the next page …

Source: PSPGen


Download: Custom Firmware 5.50 GEN-D3 Final
(Custom Firmware 5.50 GEN-D3 Final - 27.1 MiB - 1,498,528 Hits)

Thanks to Kill099 for the tip off.

Similar Posts:

  • iochoa2008

    Does anyone know if MX vs ATV Reflex works on the final build?????

  • roque08

    Hey, will you guys fix the bug that makes older games work?
    I couldn’t load my save data for socom, cabela, and my other games!

  • megamanx41

    I also found some bugs in 5.03 GEN-C like one that hides the VSH menu when the MS is switched and one that doesn’t allow any pops ver. 5.32 or lower to run so games like Resident Evil 2 and Breath of Fire IV no longer work!. I REALLY hope these issues will be addressed and an updated GEN-C will be available for us 3000 users aswell.

  • megamanx41

    I meant to say that any pops ver. 3.52 and lower don’t work. At first there’s no sound then just freezes soon afterwards and shuts down the system.

  • Born2Golf

    hi guys, I was just wondering if there is any workaround to get access to PSN from this build. I’d love to be able to access user created level for littlebigplanet. If I cannot do it via PSN, does anyone know of any other way to get these levels?

  • jiraji

    guys i wanted to ask i m running cfw 3.80 m33-5 and i have my many saved game data files of different games ..the question is will these saves be corrupted if i upgrade to this firmware or any earlier one
    as i guess mine doesnot run few games like (assassin’s creed-ultimate alliance)
    need a pro to answer wisely
    thanks

    • tekken220

      They won’t be corrupted.

      • lux143

        yes…yes they WILL be corrupted. I lost alot of savegames when updating. sucks.

    • rock_7

      Hey jiraji i really hope you get a chance to read this. I also had the same problem and I searched and searched through google and nothing but then after 3 weeks of searching I came across this thread which solved my problem help me fix my Final Fantasy Dissidia and Monster Hunter Unite corrupt save data I was really happy :) read the instruction carefully because they can get a little confusing. also I wanted to point out that you said something about which diffrent saved games will become corrupt;

      the only save games that will be effected by upgrading are the games that you played and saved with a firmware that was lower than the required firmware of the game, for example Metal Gear Portable Ops requires a firmware of 2.81 and you saved the game using 3.80 m33-5 your save state should not be corrupt after upgrading, but another game like Monster Hunter Unite which requires I believe 5.03 (I’m not sure if its that FW but its some where around there) and you saved using 3.80 m33-5 then your save data will be corrupt since you played on a firmware lower than the requirement. Hope this makes sense and helps you understand which games will become corrupt. to avoid this you should always keep up and upgrade to the latest custom firmware.

      I’m sorry for the super long essay post but I wanted to get my information out there that I had researched for a good amount of time, I wished someone would have done this for me before so it would have been a lot easier for me to have CFW 5.00 m33 and still have my savedata. I take no credit for the programs used or the guide created to make this possible. I only take credit for helping the post become more know for the people that need it. Just incase anyone has questions I can try my best to help out: psphelp_7@yahoo.com

      The two required files are:
      SaveDataE-D_cn.rar
      25455_FreeCheat1.0.12.18.zip

      if the links to the files below dont work try googling each file, another website may have it.

      Here is the Link: http://www.maxconsole.net/forums/showpost.php?p=1122026&postcount=3

      and just incase that link is dead or does not show up here is a copy of what it says:

      Hoowahman
      Registered User

      Registered: Sep 2006
      Posts: 80
      Wow I figured it out after 2 days.. Luckily I was able to babelfish that URL I posted above from chinese to english. I’ll try to type up more details about it in case more people want to know how to do it.

      File downloads:

      25455_FreeCheat1.0.12.18.zip: http://www.4shared.com/file/92963439/3628c04a/25455_FreeCheat101218.html

      SaveDataE-D_cn.rar:
      http://www.4shared.com/file/92963456/f0cd7a5d/SaveDataE-D_cn.html

      1. Extract FreeCheat to the root of your memory card

      2. Extract SED to /PSP/GAME/

      3. Follow instructions on readme to install freecheat.

      4. Back up your corrupted save game to computer.

      5. Start the game and start to create a new saved game. Before you actually save the new game to the memory stick you should press the note key which will bring up the freecheat console. We need to tell freecheat to go into dump memory mode so when you save the new game it creates the files we need. On the freecheat console go to Mem Manager -> SAVEDATE Manager -> Operate Mode -> Dump. Now hit X to back out to where you can confirm to save the game. Save the game to the memory card.

      6. Now exit the game and enable USB to browse your memory stick and go to /FreeCheat/SAVEDATA/ and you will see 2 files. I have:

      ULJM-05500.key and ULJM-05500_0.sav

      You only need to rename the ULJM-05500.key file to ULJM05500.bin removing the “-” and renaming extention to .bin. Copy this file into /PSP/GAME/SED/gamekey directory on the memory stick.

      7. Backup the new save game that you created from /PSP/SAVEDATA/ to your computer for later.

      8. Copy your corrupted save game from computer back to /PSP/SAVEDATA/

      9. Run SED and it will load a list of save games you have. Press /\ (Triangle) on your corrupted save game and press O on the top option. Then select “Yes” and hit O again to decrypt your corrupted save game to a .bin file on the root of the card. Mine is called: ULJM005500.bin

      10. Now copy your new saved game you backed up on the computer back to the /PSP/SAVEDATA/ directory. The directory of the saved game should match the name of the .bin file you just created. If it doesnt rename the .bin file to match it.

      11. Load up SED again and find the new saved game and Press /\ (Triangle) to bring up the options and select the 2nd one down from the top and press O and select “Yes” and press O again. This will encrypt the .bin file you just created into the new saved game which is the old corrupted saved game info!

      12. Now just start up the game and load your old save game that use to be corrupted!

      I’d imagine this would work for any game that is having issues because of new firmware.

      Hoowahman
      Last edited by Hoowahman; 03-14-2009 at 08:28 PM.

      • speedwarrior

        i want to down grade my psp 3000 pb 6.20 ver to 5.03 without pandora battery or mms plzz help me… send ur comment to robadhekar@gmail.com

  • Caliryder209

    I haven’t been keeping up with the GEN firmware because I’ve been using M33, but now I’m thinking about changing to play some of the newer games. Does GEN have full POPS and CXMB support yet? They’re the only reasons I’ve stayed with M33, but if GEN support them too, then I’ll definitely switch over

    • AbStrAcT4.20

      it does have pops and cxmb support. but i don’t think it can support 150 applications (tried even after loading the leda legacy software loader). and there have been complaints of pops versions 3.52 and lower not working on GEN-D3 (as the comment above by megamanx41 states). not to mention the various problems (stated by testers) with older games playing and save game data loading correctly. i say wtf to team GEN. DA was never this sloppy, and M33 (IMO) is better.

      • Caliryder209

        Thanks man. You definetly saved me a lot of time from testing what’s apparently still crap. Sticking with M33.

  • kenwood352

    Does anyone know if I can download FF VIII on PS3 then put it on my PSP using 5.03 Gen C?

    • Tehtony

      I want to know the same thing lol.

      I really want the psn version of final fantasy 8. Im not sure if its going to work while on cfw though :/

  • Tehtony

    If 5.50 gen d3 allows the use of psn demos will it also work with ps1 classics? or will the “this game cannot be started” error show up?

  • elmanmasraro

    to everyone, if your games don’t work, save files are corrupted, ps1 classics and psn demos present problems, etc, downgrade to GEN-D2. how? simply install the D2 quick updater as if you had D instead of D3 and it will work

  • roque08

    Hey, there are still bugs on corrupted data,
    but good work though, I hope you would fix this bugs!

  • mrfekry

    would this work with my 5.51 software or not? and if not when would you release the one for the 5.51?

  • Xxamber_SLasHxX

    .. is the link dead ? i keep getting an error , wrong IP something , anyone help ?

  • keane_three

    i updated to 5.50d3 and when i load my mohh umd it said my save data was currupt then i update from that to 5.50 gen D3 final build an no difference please help?!

  • jiraji

    guys plz i need an answer for my question it is the comment number 6..i think it’s important to let everybody know

  • keane_three

    ok ready if you update to 5.50d3 most old game, game saves like medal of honour heroes would becom currupted it says when you load up the game load save data curupted and dont work. Alright so i downloaded the 5.50cfw at midnight… and i didnt notice it because i havent played in awhile but then i played it and that hapeend so i looked for a solution and a new cfw had arrived cfw 5.50 gen D-3 final build it say just update over your old build of cfw 5.50 from the 15th to this and all of the game save data curupt would go away and your memory stick will be faster. i did and what i find was it is the same thing it still currupt which not good so dont update if you want to play old games but theres also another way to get it back to normal after which is cfw d2 quick updater which somebody told me on this site so update from d3 cfw final build to d2 quick updater which takes 3-6 secs and your gamesaves work again???? but now your back in cfw d2 again? but you didnt even do a quck update? by the way MGS peace walker works on d2 if you followed all these steps. If this helped say thankyou

  • t0nito

    Looks like this build isn’t all that final after all, still has some bugs to fix. I hope they consider correcting the corrupted saves problem. Keep up the good work!

  • lharvince

    When they will fix the bugs on GEN D3? I’m now running the final build but I can’t get Jack&Daxter to work. It freezes on the tutorial and then my psp shut down. I applied the patch of gen d2 and it works. MGS PW demo also works. But not Naruto Accel 3 and Avatar.

    Nontheless, thanks to team GEN for their effort in continuing development on CFWs…

    Hope for a stable release, soon…..

    • Matiez

      same here :(
      I need some one to tell me how
      to change my settings so i can play games because they keep on freezing?
      GEN 5.50 D-3

      NEED HELP BADLY :(

      THANKS

  • keane_three

    yeah hope Gen make Last build Gen D-3

  • androidhen

    I update to GEN D3 found a bug when i open my music it freezes then my psp automatically shuts off. hope that you guys could fix this problem. thanx! merry xmas and happy new year!

  • mindseye1984

    I ‘m unable to play Resistance Retribution with this build, Im receving an error that I have to update. any idea? Thanks

  • keane_three

    resistance online or normal an is it us or eu

    • mindseye1984

      resistance online, US

  • darkace16

    team gen plz released a new 6.10 GEN A…

  • sepatunike

    @ALL

    i am found bug at the games Ben 10 Alien Force Vilgax Attacks [USA],the error freezer at savedata in first time.
    can anybody @@@@@@HELLLLPPPPPPPPPPPPPPPPPPPPPPPPPPP.
    thx

    • Matiez

      same problem,, help uss!!!!!

      • elmanmasraro

        use the d2 quick updater over the d3 final build (don’t downgrade, just use it) and thats it

    • tekken220

      LMAO, Ben 10??! How old are you?

  • true_gamer9

    hey, i have a question. i am still on 5.50gen-d2 and i want to update. can i just update directly to this final build of 5.50gen-d3 or i need to update to early build first and then to the final build of 5.50gen-d3?

    • sepatunike

      @true_gamer9
      u Can update directly form d2 to d3 Final.
      sometime i have 5.00M3 i am update direct to 5.50Gen D3.
      hope this can answer u question.
      thx
      @@@ Merry Christmas @@@

    • elmanmasraro

      update to this final build directly BUT then update again to d2 with the quick updater or else your old games will be rendered shit

    • skylinekid17

      old games? like what games?

  • r88ney

    ive found no problems so far with this besides non IRSHELL Support
    * Added support for IRSHELL D3 which will release shortly.
    when will it be relased becuase for me its taking to long :( and isnt being relased sortly

    GEN-B2 Patch for IRSHELL 5.0 works tho but it cant play newer games like naruto accel 3 that require the pink flashing :(

  • damasio1982

    i had the same trouble with running older games…for example…WWE SvR ’08 wouldn’t start with D3..but when i ran the D2 quick updater…not only did it start..but the save game was ok too…one that i downloaded with all the extra stuff unlocked..(characters, arenas…) so..my opinion is..skip D3 for a while.that is..if you still play games from 2008 and bellow..

    HAPPY HOLLIDAY!!

    • sepatunike

      same to me at Games BEN 10 vilage
      i am hope Team GEN can fix D3 Final or D3-2 Moreeeeeeeeeeee…….
      @@@ Merry Christmas @@@

  • Niceeric

    Hi all!i av a problem wit using d 5.50 gen d3 final,i cant play multiplayer games on adhoc mode.PLEASE HELP!

  • epiquestions

    This works for me. the only problem is some of my games freeze when I compress it (.cso). None of my games freeze in 5.00 M33-6. So if you are having problems with your games then this might be the cause. Try uncompressing it and switch between sony np or m33 umd drivers. And if you are still having problems try setting the game overclock to default (sony umd works for most of my games)

    Anyway it’s just as easy to rollback to M33-6 so it’s not really a problem

  • damasio1982

    but still…great effort from team GEN to try and bring us another good CFW..bugs are prone to appear so…let’s hope they sort them out as soon as possible..it’s hard to pick up where Dark Alex left off…so…each progress team GEN makes…it’s a breakthrough to everyone of us!!

    keep up the good work team GEN!

  • Niceeric

    Ad-hoc mode still isnt working wit gen d3 final,anyone got a solution?

  • jiraji

    to rock_7
    ————-
    i m so impressed my friend wow! u helped alot and now i m very grateful thank you so much!!!
    i m going through this asap…and i guess now there is a post for the corrupted saves on the internet :) thanks to you..you ve helped me and many people that suffers from the problem
    god bless you!

  • jeetest

    hey guys i m new i just want to know that i am going to buy new psp 3004 (india). so can i install cfw in it…ps i dnt know what firmware is install in it by default plz guys help me out here i m very confuse

  • jeetest

    hey guys i m new i just want to know that i am going to buy new psp 3004 (india). so can i install cfw in it…ps i dnt know what firmware is install in it by default plz guys help me out here i m very confuse

  • Jeffski

    Ok i know this is off topic… sorry… but i was wondering if anyone knows of a program that can make a Pandora battery? I have a 3k with 5.03 gen-c and my friend has a psp 1k with ofw… i wanted to make his battery a Pandora…

    • damasio1982

      3k can’t write to bateries…and 1k can..but they have to be hacked..so..that leaves you my friend..in a stand still..either you get someone with a hacked 1k..ou 2k with TA-085 MOBO v1 or as a last resort..you order a pandora battery..and have a permanent solution for any possible bricking that your friend might suffer..

      as an advice..ditch the 3k..and get at least a second hand 2k v2…witch is the one’s with the TA-085 boards..they don’t allow writing to the batteries..but can still be hacked with a pandora battery…i ordered mine through the web..from a portuguese reseller..for about 28€..so..they don’t go much far from in either in the US or the UK..

      hope to be of some help..

  • saransh29

    can someone tell me how to install this firmware. Is this like
    GEN-A>GEN-B>GEN-B2>GEN-D>GEN-D2>GEN-D3
    OR
    directly GEN-D>D2>D3

    • damasio1982

      no..you can jump straight to D3..although i don’t recomend it if you still play games from ’08 and below..other than that…the FW works great..! that’s the only reason why i’m not with D3..

      so..for all those complainers…give the guys a break..probably that’s the same reason why DAX called it quits..too much of a pain in the ass..for something that it’s free..and illegal…[there's the beauty of it] :P

  • jafus

    WOOW GUYS PLEASE STOP COMPLAINING….THEY DONT GOTTA DO ANYTHING FOR YALL.
    ALL YALLS FREAKIN COMPLAINING IS WHY DAX LEFT(in case yall didnt know)!!LIKE 90% OF YOU GUYS SAY THIS HAS TO MANY BUGS….BLAH BLAH BLAH. WHEN WE LOSE GEN TO THE ”COMPLAINERS” THEN WHAT WILL WE DO? GEN IS DOING AMAZING WORK IF U DONT LIKE THE BUGS MAKE YOU OWN CFW.

    PSP 3000 V5.51 =’[

  • Jerico1830

    Why doesnt everone just downgrade back to 5.0m33-6 and decrypt each new game individually. This at one time may have seemed like the “hard way” to do things but with all the problems that have arrived from the Gen firmwares it is now the “easy way” Besides, all plugins are 5.0 compatible by now anyway.

  • jafus

    lets give gen a little time they have been working hard. they are our current day ”dax” so instead of complaining we should just tell them they are doin a great job …that way they will comtinue to work.
    i just wish they would hack psp3k 5.51 =[

  • Pingback: Newbie question about GEN-C 5.03 Final - PSP Slim Hacks - PSP Forums

  • Pingback: Metal Gear Solid: Peace Walker Demo in English Released - PSP Slim Hacks - PSP Forums

  • noney_31588

    hello everyone pls help me guys i installed gen 50 d3 and it runs ok..i accidentally pressed (MAKE PANDORA BATTERY in recovery menu)and when i shutdown my psp and turn it on my screen turn black..i thought my psp was brick but when i barrow another battery from a friend my PSP runs ok…what should i do to restore my own battery?can anyone help me to fix it?thanks in advance=)

  • searcam01

    hey I updated my psp from d2 to d3 final and all my saved data got corrupted, then i just used the gen d quick updater and everything worked fine including the metal gear solid demo. This is awesome!

    • darktech

      you know there is a patched iso version of the demo that works on m33, right?

      • searcam01

        no i did not and thanks for letting me know. I’ll download it tonight!

  • masterlockex

    Ei! guys i have problem with my 5.50 gen d3 my buttons arent working except for volume buttons cant find any sollution i tried disabling vsh menu via recovery menu and it semi fixed but still it goes back after few mins
    any help thanks…

  • yuva_7227

    hi guys,
    i was installed the gen d3 in my psp 2000, i was suscessfully installed, i got an small problem in my display the display colour was changed lite GREEN colour, just like in psp 3000′s the COLOUR SPACE option put in into NORMAL mode. PLZ HELP ME

  • jeetest

    hi plz help i have sony psp 3000 and firmware 5.51 so can i install custom firmware 5.50

  • jeetest

    plzzzzz guys tell me i have sony psp 3000 and firmware 5.51 so can i install custom firmware 5.50

  • suliman999

    jeetest
    the psp 3000 must be on firmware 5.03 or less to install CFW
    and you must use the cfw for 3000 only
    the cfw here for psp 1000 psp 2000 you should not install this on psp 3000
    ok

  • jeetest

    thanx suliman999…..

  • unnamed

    Hello

    I have a psp 2000 with the firmware 5.00 m33-4, can i install this firmware? How?
    do i have to do anything different?

    thanks