Comments on: All-In-One 5.03 GEN-A Installer by Skyline969

By: llanero6

llanero6 — Wed, 11 Nov 2009 13:00:08 +0000

I Installed Skyline969′s All In one 5.03 GEN-A in my PSP 3000. I did the hack process with no problems, but my PSP is no showing games in the Memory Stick when I try to play them. This option only shows the INSTALLER-LOADER and the Refresh icon. I changed “UMD Mode” to “M33 Driver”, but it didnt solve the issue.

Please, is there anything else I have to do?

By: AUTOk47

AUTOk47 — Mon, 14 Sep 2009 00:24:58 +0000

…i did everything,
got 5.03
went into chickhenR2
flashed GEN
pushed O
but it will never reboot in GEN!!!!!
any advice?

By: ferdinand

ferdinand — Fri, 04 Sep 2009 10:57:23 +0000

is their anything for psp 1000??

By: Joshthebest

Joshthebest — Sat, 22 Aug 2009 04:12:17 +0000

Actually, I used both CFWE and GEN-A both installed, nothing happens except if u install GEN first, the vsh menu for gena is used, even if u installed the CFWE after this and vice versa

By: wdfowty

wdfowty — Sat, 15 Aug 2009 18:39:11 +0000

By refering to eboot, i assume you mean psx eboots? have you tried adding popsloader? that solved my problem instantly (when i had a 3000). just remember to use pops 4.01 before using the others, to avoid any problems. after it was all said and done, i returned my 3k for a cash refund and bought a 1001 (gamestop has em for under $100) and promptly flashed it with 5.00 m33-6. i couldn’t stand the chickhen method, way too tedious for me.

By: Black Lion

Black Lion — Tue, 11 Aug 2009 09:16:41 +0000

does this mean it will work for a psp 3000 with firmware of 4.20? And im kindof new to this whole hacking thing can u explain what this gen thingy does and wat is CTW?

By: yamaha_125

yamaha_125 — Sat, 08 Aug 2009 14:57:48 +0000

Hi just alittle ajustment to the last message i wrote, my psp is 3003 on ofw 5.03 .
Cheers.

By: yamaha_125

yamaha_125 — Sat, 08 Aug 2009 14:39:13 +0000

HI im new to this psp hacking. i have a psp 3003 and ive done the chicken r2 and have a loader to make it into gen-A and on the same memory stick i have cfwe 3.60 and 3.50 ,ok, when i run the cfwe 3.50 in my system psp system its says 5.03 m33 and when i run the cfw 3.60 its says in system 5.03 mhu 1, whats the differents ? and 2 , i can play EBOOT games when i run just gen-a but not ISO OR CSO .when i run the cfwe 3.50 or 3.60 i can only play ISO CSO ive tryed to play the EBOOT but it just turns off the psp , so i have all of this on me memory stick is there a way of combining them ie; (WHILE IN chickHEN ) can i boot up gen-a and play EBOOT games then without turning my psp off and starting again change it to cfw 3.60 or will that brick my psp ??? ive found this very intresting and am happy playing all the games since cracking it this is as far as ive got from hours of reading and testing but i dont know if i can run one over the top of the other
PS. Also when running cfwe 3.50 i saw on a website that the person had to push select on the psp and change the setting from normal to m33 driver im wondering do i have to do that evey time i flash the drive from swiching from the loader (gen-a) back to 3.50 ???
i would be well greatfull if u would help me with this . many thanks