Forum member Skyline969 has released another all-in-one installer this time for PSP-2000 & PSP-3000 users who are looking for an easy all in one Custom Firmware 5.03 GEN-A installer. Its straight forward an easy aimed at new users who can let an install do all the work for them. All you need to do is point the installer to your PSP memory card.
All-In-One 5.03 GEN-A Installer! Included is all the tools you need to get your PSP to boot to 5.03 GEN-A custom firmware. Keep in mind that if you shut off your PSP or lose battery power, the firmware is gone and you have to re-load it (but NOT re-flash it). However, to work around this, just put your PSP in standby. It won’t hurt your battery, no worries.
The tools included are:
Official Firmware Update to 5.03
ChickHEN R2
5.03 GEN-A Installer/LoaderInstructions and credits are included in the installer.
For the download links please visit skyline969’s fourm thread: Skyline969’s All-In-One 5.03 GEN-A Installer
Similar Posts
Digg it
Stumble
Del.ico.us
Reddit
Newsvine
Leave a comment
Add your link!
August 6, 2009 at 1:14 pm
2 questions – What if you DO reflash it? And is this the best CFW out there for psp 3000?
August 6, 2009 at 1:22 pm
What is This ??? can its work on 5.50 ???
August 6, 2009 at 2:20 pm
CAN’T YOU EVEN READ THE TITLE, ALL-IN-ONE 5.03!!!! idiot
August 11, 2009 at 11:16 am
does this mean it will work for a psp 3000 with firmware of 4.20? And im kindof new to this whole hacking thing can u explain what this gen thingy does and wat is CTW?
August 6, 2009 at 4:02 pm
CAN WE PUT THIS OVER CFWE OR OR IT WILL BRICK MY 2K
August 6, 2009 at 6:06 pm
yeah….u can use it…
but uninstall cfwe first….
August 22, 2009 at 6:12 am
Actually, I used both CFWE and GEN-A both installed, nothing happens except if u install GEN first, the vsh menu for gena is used, even if u installed the CFWE after this and vice versa
August 6, 2009 at 6:57 pm
Hello! A question! I ther any way to trick new games like G.I.JOE The Rise Of Cobra!I? have a PsP 2004 and 5.03gen!And this game and other new games, I think, want the last firmwere update to play them!Thanx!
August 6, 2009 at 10:04 pm
wil this work on any psp 2000 with any motherboard
August 6, 2009 at 10:36 pm
cause i have a psp 3000 with ofw 5.50
and i was so stupid enough to update it
and i just had 5.03 a few months ago
August 6, 2009 at 11:35 pm
someone should make a stable chickhen loader so we don’t have to take all the time to load it everytime our psp shuts down.
August 7, 2009 at 12:54 am
sand by mode ? faster start up aswell ^^
August 8, 2009 at 10:11 am
Impossible, as it is the Tiff exploit which is unstable.
August 7, 2009 at 1:38 am
Could anyone tell me the difference between this and the cfwenabler?
August 7, 2009 at 2:59 am
i think cfwenabler is still better
August 7, 2009 at 4:01 am
why its still the same thing either……….
im expecting the permanent custom firmware for psp 3000 and ta-88v3
August 7, 2009 at 4:01 am
can i copy the files into the desktop or a diferent folder
cuz i used the other instaler for psp 1000 and psp 2000
now it doesnt turn on without the ac adaptor the batery still charges but doesnt turn
is the batery wrong or the psp
August 7, 2009 at 6:14 am
will chickhenr2 work on any psp motherboard to us pspident
August 7, 2009 at 6:15 am
sorry i speled use us dont get mixed up
August 7, 2009 at 6:37 pm
Man, what a bummer. Everyone is working hard for a lot of programs to make easy hacking PSP but nothing for 5.51 yet. Lol.
August 8, 2009 at 3:19 pm
I can see this method of putting your psp in cfw means you cannot shut your psp down. The very same is with the CFWenabler. But is there a way to set CTF themes on one of these 2 methods?
August 8, 2009 at 4:39 pm
HI im new to this psp hacking. i have a psp 3003 and ive done the chicken r2 and have a loader to make it into gen-A and on the same memory stick i have cfwe 3.60 and 3.50 ,ok, when i run the cfwe 3.50 in my system psp system its says 5.03 m33 and when i run the cfw 3.60 its says in system 5.03 mhu 1, whats the differents ? and 2 , i can play EBOOT games when i run just gen-a but not ISO OR CSO .when i run the cfwe 3.50 or 3.60 i can only play ISO CSO ive tryed to play the EBOOT but it just turns off the psp , so i have all of this on me memory stick is there a way of combining them ie; (WHILE IN chickHEN ) can i boot up gen-a and play EBOOT games then without turning my psp off and starting again change it to cfw 3.60 or will that brick my psp ??? ive found this very intresting and am happy playing all the games since cracking it this is as far as ive got from hours of reading and testing but i dont know if i can run one over the top of the other
PS. Also when running cfwe 3.50 i saw on a website that the person had to push select on the psp and change the setting from normal to m33 driver im wondering do i have to do that evey time i flash the drive from swiching from the loader (gen-a) back to 3.50 ???
i would be well greatfull if u would help me with this . many thanks
August 15, 2009 at 8:39 pm
By refering to eboot, i assume you mean psx eboots? have you tried adding popsloader? that solved my problem instantly (when i had a 3000). just remember to use pops 4.01 before using the others, to avoid any problems. after it was all said and done, i returned my 3k for a cash refund and bought a 1001 (gamestop has em for under $100) and promptly flashed it with 5.00 m33-6. i couldn’t stand the chickhen method, way too tedious for me.
August 8, 2009 at 4:57 pm
Hi just alittle ajustment to the last message i wrote, my psp is 3003 on ofw 5.03 .
Cheers.
September 4, 2009 at 12:57 pm
is their anything for psp 1000??
September 14, 2009 at 2:24 am
…i did everything,
got 5.03
went into chickhenR2
flashed GEN
pushed O
but it will never reboot in GEN!!!!!
any advice?
November 11, 2009 at 7:00 am
I Installed Skyline969’s All In one 5.03 GEN-A in my PSP 3000. I did the hack process with no problems, but my PSP is no showing games in the Memory Stick when I try to play them. This option only shows the INSTALLER-LOADER and the Refresh icon. I changed “UMD Mode” to “M33 Driver”, but it didnt solve the issue.
Please, is there anything else I have to do?