6.31 HEN and 6.35 HEN released for Minna no Sukkiri demo exploit!

Monday, January 3rd, 2011
Share

aka and Coldbird’s HEN for 6.31 and 6.35 have been released! The ones that were stuck on 6.31 or 6.35 Firmware, this is what you have been waiting for! Your now part of the HEN party that’s happening. Instructions on how to use it below:

  1. First download the correct HEN for your version of firmware either HEN for 6.31 or HEN for 6.35 (below)
  2. Download and install HBL rev 112 for  Minna no Sukkiri demo exploit
  3. Download the PSP Demo and save data exploit. Extract the folder UCJS10094.zip to PSP/SAVEDATA
  4. Now in the directory /menu/EBOOT.PBP overwrite this eboot with the appropriate HEN version for your Firmware 6.31 or 6.35
  5. Start the Minna no Sukkiri, load HEN and enjoy homebrew!!!

Yes ISO loaders like Prometheus ISO Loader do work on & 6.35… But remember legal ISO backup’s or you shall burn in HELL.

Source: Wololo & Thanks tejushva & Irfan for the info !


Download: 6.35 HEN for Minna no Sukkiri save game exploit
( for Minna no Sukkiri save game exploit - 68.7 KiB - 33,652 Hits)


Download: 6.31 HEN for Minna no Sukkiri save game exploit
(6.31 HEN for Minna no Sukkiri save game exploit - 68.7 KiB - 51,181 Hits)


Download: Minna no Sukkiri demo and save data exploit
(Minna no Sukkiri demo and save data exploit - unknown - 32,524 Hits)


Download: HBL R112 for Minna no Sukkiri
(HBL R112 for Minna no Sukkiri - 555.2 KiB - 59,706 Hits)


Similar Posts:


Tags: , , , , , , , ,

Posted in Featured, PSP Exploits

← Older Comments
Newer Comments →
  • hfhfhgfkfh55563

    Because u can get cfw with hen and ye the hen does work on go. I got cfw using this hen using hellcats pandora installer and psp grader 8

  • TheHacker

    But pandora battery an MMS dont work wid the psp go!!!???

  • hfhfhgfkfh55563

    Ya but he has a psp 3000

  • shaanu

    does this work on psp 1000

  • hfhfhgfkfh55563

    If u have a psp 1000 then u can get cfw by using this hen

  • Pitbrad1173

    does this work also in cfw 6.30 psp 3000?

    • M6_Blade

      You need to update your psp to either 6.31 or 6.35 before you can run this HEN and play prometheus ISO Loader .

      • Pitbrad1173

        …or can I downgrade my psp3000 v6.30 to 6.20? how?

  • psp_newbie

    what iso loader should i use??

    • http://chillshare.com Sabheeh

      use PrometheusIsoLoader this is great

  • PSP-Tester

    Waste of time it seems. The CFW installer crashes the PSP when in HEN mode. PSP-2004 – TA-085v2.
    And sadly enough, my luck was out when i tried Hellcat’s RF to return to GEN-D so i guess i will need to find my battery converter lol.

  • Varxtis

    Stupid 2-part question maybe… I tried to find the answer by scanning the comments, but couldnt find a specific answer… but is this specifically for slim, or can this work for go 6.35? And if so, is there ANY other base version of hen that I need pre-installed prior to following the directions for this one? I JUST bought a PSP Go yesterday, wanting a fresh legitimate (non-CFW) system just for KH BBS, and what do I get, screwed lol.

  • Pingback: 6.35 Custom Beta 2, PSP 6.35 Custom Firmware by neur0n, PSP Hacks - PSP Slim Hacks

  • HaHaHa_psp

    hey guys i have a friends psp which haz 6.35 and i did the Xploit and the it shows WARNING:MEMORY LEAK and the psp freezes plz help

    • anonymous

      I don’t know why it freezes but what should happen is that after it says memoy leak you should be taken back to the psp xmb (menu) and you should be running 6.35 pro. Check the system info under settings to see if you are runnign 6.35 pro after you do the exploit.

      • langre

        yeah, my psp freezes too after “MEMORY STICK LEAK” DOES ANYBODY KNOW WHAT TO DO WITH THIS???

      • langre

        WARNING! MEMORY LEAK
        CONFIG FILE:
        MSO:/HBL/HBL_CONFIG.TXT

        AFTER THAT IT FREEZES, WHATS WRONG WITH THIS? IVE DONE EVERYTHING THE INSTRUCTION SAYS AND STILL IT DOESNT WORK! CAN SOMEBODY HELP ME??

      • HaHaHa_psp

        oh yea do u guys all have a psp 2004 if so this hen might be crashing only on psp 2004

      • hubartus

        Same for me, hen 6.31 not working on a 2001 with TA-088v3

  • el culero..

    somebody can tell me if works this 6.35 on pspgo???… becouse i have a customer I charge him $200 dollars for to install iso’s and i dont want to brick his fucking pspgo? Works or no on pspgo 6.35?

    • anonymous

      Yes it works fine with psp go running 6.35.

  • Nasibul

    Does this work on the psp 3000

    • M6_Blade

      Yes. it 100% work

  • ryan

    i cant run my 6.31.. i have install everything on the guide but it wont work…. can u plz change ur demo game to english version like patapon…thanksz.. pspslimhacks….

  • Drchops

    Hey? Has anyone tried a psx emulator using this exploit? If so which one? Ive tried pops loader and it doesnt start the game…Any clues? Thanks in advance!

  • Varxtis

    Bumpity Bump Bump. . . Does anyone know about my question stated a few comments ago?

    • the_4thdoctor

      Yes it works an a Go.Just update to Sony 6.35 and follow instructions.Also put 6.35 hen updater U used to replace one in menu in game folder as well so when U go in game folder U will see Minna and Hen by Coldbird on card,only run the Minna,NOT NOT HEN..Runs all my emulators and 26 ISO’s(over 600 games total and growing).My Go RULES!!!!!!!!!!!!!!

      • Drchops

        Does the psx emulator work? Which one? I have a 3001 psp

      • varxtis

        Thank you. I appreciate it. Ill be trying this this evening.

      • varxtis

        Okay… so everything seems pretty straight forward as far as what folders/files go where… but when I start up Minna, its in japanese and I don’t know which options/path to take to load the HEN. Or am I supposed to load Minna only to exit it using the PS button and then load the HEN?
        Im really sorry for being retarded about all this, but I just cant figure out which steps to take while using the psp go. Further assistance would be appreciated.

  • Spark

    Look in the forums for information on the installation, it helped me.

  • http://chillshare.com Sabheeh

    There is no vsh plugin.Can we run ultimate VSH menu that is for 5.xx cfw.Is VSH menu released

  • James

    Is the latest CWCHEAT able to work with this? Didn’t work when I tried.

  • Pingback: Code Retard: Anything Geeky Goes

  • Widi

    does this work on psp 2000 ?
    i have been try it , but after load the save data my psp shut down ! please help me

  • hfhfhgfkfh55563

    @widi If u have a psp 2000 then u can get cfw with this

  • Widi

    @hfhfhgfkfh55563 how can i get it? please give me the instruction. thank you

  • Cybrinsanity

    ok so I have a PSP 3001 with 6.30 if I upgrade to 6.35 and install this can I play old PSone games on it?

  • zed

    the plug-ins for this works gr8ly

  • hfhfhgfkfh55563

    @widi if u already have this hen installed then download hellcats pandora installer and install the pandora battery and then download psp grader 8 to create a mms. When u done take out the ms and battery and then put in the ms and while u putting in the battery hold L and a screen will come up with different options and go into install 5.00 m33 and u have cfw

  • anonymous

    I did the exploit and it runs fine on my psp go 6.35. But does anyone know how to run plugins or more specifically overclock the cpu of the psp so that Vice City won’t be so laggy?

  • Widi

    @hfhfhgfkfh55563 so, i must buy new battery and mms ? and can you make the instruction more detailed please, i don’t understand. and can you give me the link of the software needed?

    sorry, my english is so bad. i’m indonesian

  • pspslimhacks fan

    help me i just bought a 4gb memory card and when i am putting the hen it freezes but it doesnt say anything like memory leak it just loads the hbl and freezes after it load any sugeestions

  • Code: Name

    Thanks .. it’s work 1000% ,
    But, PROMETHEUS ISO LOADER can not play Naruto Shippuden: Ultimate Heroes 3.
    Can you help me?

    BRAVO PSP HACKS !!! BRAVO INDONESIA !!!

    • pspslimhacks fan

      help me i just bought a 4gb memory card and when i am putting the hen it freezes but it doesnt say anything like memory leak it just loads the hbl and freezes after it load any sugeestions and yes i did restore and formatted my psp

  • El Katsudon

    Ive just upgraded to 6.35 on my psp 3001 and i went ahead and added the hen. This is my first go around with this kind of thing so maybe im just doing something dumb but i cant get my iso loaders to work at all. With prometheus it just brings me to the iso screen and when i pick a game, the psp crashes. black screen no go. same with openidea. Any help, ideas, solutions?

    • langre

      MAKE SURE UR GAME IS IN .ISO..

      • El Katsudon

        IT IS, Ive tried .iso, .cso, even went and did an eboot or two for older version openidea, no dice, I dunno it looks like everyone is getting it right. i mean my psp is the white assasins creed edition, but i doubt that makes a diff. ive reinstalled hen 6.35 more than a couple times. im almost beaten here

  • SuperNoob

    Hey im a Total noob hack and Psp sooo yeah need a lot of help…. i already have 6.35 OFW and 6.35Hen that only has the ISO loader…. but not the homebrew and when I download some games it says i need a CFW m.33 will this help and do i have to get rid of my previous 6.35 Hen (ChickenHen)

    • SuperNoob

      and yes i put my ISO’s into the ISO folder that ive made into the root od the card…. and the ISO sometimes feezes or wont load @ all.

  • Austin

    Here guys i made a tutorial

    http://www.youtube.com/watch?v=0Qs-MwDXVlY

    it may be sloppy but its a dam good tutorial

  • Fire

    WARNING! MEMORY LEAK
    CONFIG FILE:
    MSO:/HBL/HBL_CONFIG.TXT

    AFTER THAT IT FREEZES and then shuts the PSP off.please help…is there any work around aside from reformatting my memory because i tried it many times.

    • hubartus

      same problem for me when using 6.31 on a TA-088v3 mother board, quite a few others having a similar problem too, hoping for a fix, if you have had a hen 6.31 crash problem and resolved it, please share the solution. Thanks.

  • deucide

    when they say psp 3000 is not hackable, does that mean its physicly not hackable or just no one has figured out how yet

  • hfhfhgfkfh55563

    @widi no u dont need to buy a battery and ms. Dowload hellcats pandora intstaller u can google it then put it in psp/game/*** (put it in game folder) then on your psp open pandora installer a when u in it go to battery settings and say create pandora battery. When thats done exit pandora installer and on your pc download psp grader 8 u can google that as well. Then when done downloading u can google how to make a psp mms with grader 8 and find how to install it. When u done installing it take out your battery and ms and then insert the memory first and then the battery, but while putting in the abattery hold ) then a menu will pop up and then go to the first option to install 5.00m33

  • Big

    Hi everybody! Can anyone please say if this works on psp 3004?

  • http://gbatemp.net ThugETH

    I’m using 6.35 hen on a 3003 PSP, Prometheus works just fine but SNES and GBA emus start to load then crash rebooting to the XMB, any ideas?
    I am miffed I have them working on a 2003, an issue with just the 3003?
    The SNES emu says it has error reading mem stick then force closes and the gba one force closes as its building rom list with some message that I cant read as it closes to quickly.

    • zed arshad

      use gba bios!!!

  • zed arshad

    suhail read dis comment!!!
    first download hen 6.31 and save data
    then the games and hbl and h.bin
    then put hbl in root of memorycard and h.bin too
    the put the HEn in hbl\menu\
    now copy sdk to savedata
    then put the demo in games folder

  • Joop

    Psp3003 and 3.35 works for me i get a memory leek also but he installed the pro version.

  • kongzaw

    is there any others files do i need to install to run ISO with Prometheus ISO Loader on this 6.31HEN?
    i mean like kmem.dump or umd_dump,………..

  • P3P

    god dam everyone! this works OK 100%!!!! Just do exactly what the des. says and it will be fine it works on psp 3000 and go if you have a 1000 or 2000 just do the same thing!

    • El Katsudon

      I have done exactly the directions though. the HEn works just fine and so does starting up prometheus, just nothing loads ive tried a bunch of different ps1 games. I use alcohol 52 to make my images. am i missing something simple or something, i figured by now its either my machine or the games im using because, it’d be unbelievably hard to screw up that much

  • http://ShadowHacks.tk McNuggetz

    Ok 6.35 PRO HEN HAS A LITTLE PLUGIN SUPPORT I HAVE TEMPAR RUNNING AND IM HACKING SOCOM FTB1 CAUSE FTB2 SEEMS TO FREEZE WITH HEN BUT DOWNLOAD TEMPAR N SERCH ON WOLOLO.NET/TALK ON HOW TO MAKE IT WORK I DID IT NOW U CAN

  • Andrew

    It works on HBL R109? PSP 3004 4G

  • tejushva
  • kran34

    i need some help it wont work on my psp and i did every thing the instructions said plus i already tried it with my brothers psp and it worked on his i need help to now how to make it work on my psp so HEEEEEEEEEELLLLLLPPPPPPPP NOW!!!!!!!!!!!!!!!!

  • M6_Blade

    1 little problem. it is 100% working on my PSP 3004 using this HEN. the problem is, after im using loading exploit save data and loads HBL, it says memory leak. The HEN is working, and so was the Prometheus iso loader. But The one tht says(Memory Leak!) maybe big. could some 1 help me how to fix it??? thenks

    • pspslimhacks fan

      its normall

    • Brainkilla79

      @ M6_Blade… aye buddy… don’t worry about it… it is normal when you run Minna no Sukkiri… with the exploit… I know that it is a common psyc out, when you see that script text flash “MEMORY LEAK”… but trust me and everyone one else on this site that are either currenty running 6.35 PRO / or has ran it…
      You should actually be very proud of yourself…
      most the issues with people running the exploit either…

      1) don’t pay attention to the directions for which selection to make at the begining of
      Minna no Sukkiri… (the saved game… duh peoples… should already be highlighted…
      was the first time I loaded exploit / still is highlighted option today when I load it… )
      or…

      2) again… don’t pay attention… and put their ISO / CSO files in the GAME FOLDER???….
      uh no… maybe with some other CFW’s but the directions for this one say to PLACE ISO / CSO in to
      a folder in the root of your memory stick (here is the hint ->>>)… name this folder “ISO”….

      WHEW WEE.. THAT IS SOME TOUGH STUFF.. lol….
      Congrats on getting it to work… sorry you got freaked cuz of the “MEMORY LEAK” message… happens to the best of us… Keep on.. Keep’en On!!!

      JUX

      “With an extended battery pack, cracks and a pocket full of codes…
      you can pretend you have my reality of hacks, xmb, and iso’s I use to conquer the globe!!! ”

  • http://google Uktonic

    Um>>>>>>Guys i have a psp 3001 FW 6.35 it should work but i have the game on my psp……..HOW DO U INSTALLL OR TRANSFER THE HBL REV 112 TO UR PSP HOW DO I………GET ALL THE STUFF ON MY PSP ……

  • Andrew

    It works on PSP 3004 G4 !!! (with HBL R109)
    With Prometheus ISO Loader it’s awesome!!!!!

  • varxtis

    Okay… so everything seems pretty straight forward as far as what folders/files go where… but when I start up Minna, its in japanese and I don’t know which options/path to take to load the HEN. Or am I supposed to load Minna only to exit it using the PS button and then load the HEN?
    Im really sorry for being retarded about all this, but could someone tell me what Im supposed to do after I get everything onto the psp and am now in the psp XMB?

← Older Comments
Newer Comments →